Manual Clatronic mc 1028 cd mp3 (page 30 of 46) (English, German, Dutch, French, Italian, Polish, Spanish)

159843

Zoom out

Zoom in

1/46

ENGLISH

• Insert the plug into a properly installed 230 V, 50 Hz power

socket. Please ensure that the mains voltage corresponds to

the information on the type plate.

• The POWER (1) control lamp shows the function.

Remote Control Batteries (not supplied)

• Open the lid of the battery compartment on the back of the

remote control.

• Insert 2 batteries of type R6 „AA“ 1,5 V. Ensure that the

polarity is correct (see the ﬂ oor of the battery compartment)!

• If the remote control is not used for a prolonged period,

remove the batteries in order to prevent battery acid leaking.

• Different battery types or new and used batteries must not

be used together.

• Then close the battery lid.

Warning: batteries are not to be disposed of together with

domestic wastes. Dispose of the used batteries at the relevant

collection bin or at your dealer’s.

Never throw batteries into the ﬁ re.

CD deck transport protection

• Please open the CD compartment by pressing the

(open)

button (12).

• Remove the transport protection from the CD player if

present before use.

Headphone Socket (7)

Please use headphones with a 3.5 mm stereo jack plug; these

should be inserted into the PHONES socket. The loudspeakers

are then switched off.

BASS ON/OFF (26)

This is used to amplify the bass sounds. The switch can be in

one of two positions,

ON or OFF.

Volume

The desired volume can be sent using the VOL.DOWN/UP

regulator (5).

POWER (4)

Turn the device on or off. The POWER (1) control lamp shows

the function.

Listening to the Radio

1. Turn the function selector switch (6) to the RADIO position.

VHF (Stereo) = FM ST., VHF = FM,

Medium wave = AM (Mono)

2. Tune in the desired station with the station adjustment knob

TUNING (8).

3. The FM.ST control lamp (2) only lights up when you have

selected FM stereo and the station is being received in

stereo quality. If reception is too weak and there is noise

on the station being received, this lamp will ﬂ icker. Try to

improve reception by turning and bending or twisting and

altering the length of the antenna (30). Where reception is

bad we recommend switching to FM.

4. An aerial is integrated into the device for the reception of

AM stations. The machine can be aligned to the station by

turning it. In this frequency band programs are transmitted in

„mono“ only.

Cassette Operation

Playing Cassettes

1. Turn the function selector switch (6) to the TAPE position.

2. Press the

stop/eject button (21) to open the cassette

compartment (19).

3. Push a recorded audio cassette, with the tape downwards

and the listening side facing forwards, into the compartment

(full reel to the left). Then close the cassette compartment

(19) again.

4. Press the

playback key (24) to listen to the tape.

5. With the

stop/eject key you can stop playback.

6. Wind the tape forwards or backwards if necessary in the

direction of the arrow keys

̈̈

= forwards (22),

̇̇

= reverse (23).

7. Always press the

stop/eject key (21) when changing

the direction or stopping the tape. This prevents damage to

the machine and the tape.

8. If the

stop/eject button is pressed again the ﬂ ap of

the cassette compartment opens.

9. In order to interrupt playback brieﬂ y, press the II pause

button (20). Pressing again continues playback.

Recording Cassettes

1. Insert an audiocassette with the side on which you wish

to record facing forwards (full reel on the left). Ensure that

the cassette is not copy-protected (the copy protection tab

on the top narrow side of the cassette must not have been

removed).

2. Select the source from which you wish to record with the

function switch (6) and then start playback from this source

if necessary. The sound source which you are listening to

is the one from which the recording is made. The recording

level is controlled automatically. Any changes to the sound

and volume do not affect the recording.

3. Please press the

record button (25) (the

playback

button is automatically pressed down at the same time).

Recording now begins. All previous recordings are automati-

cally erased.

4. The recording can be interrupted brieﬂ y using the II pause

key (20), or stopped by means of the

stop/eject

button (21).

Playing CDs/MP3

This is how you play a CD

1. Turn the function selector switch (6) to the „CD/MP3“ positi-

on.

2. In order to open the CD compartment, press the

(open)

button (12).

05-MC 1028 CD 30 28.07.2006, 10:06:13 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic mc 1028 cd mp3 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic mc 1028 cd mp3 Manual

Product: