377595

Clatronic kwa 3115 Manual

32
Zoom out
Zoom in
Previous page
1/50
Next page
ENGLISH
ENGLISH
32
Symbols in the Display
Battery fault Total amount stored
Overload General error
The storage capacity
for the nutritional
values is full.
The Control Panel
The Red Button
• Press the red button to switch the scales on.
• Press the red button while weighing food to use the tare
function.
• Keep the red button pressed down for 2 seconds to switch
the scales off.
The Blue Buttons
The scales can add together the values for your different
ingredients and foods.
M+ Press this button to store the values of the food you
are currently weighing.
MR All the stored values are added together and
displayed.
MC CLR Press this button briefl y to delete the FOODCODE.
Press the button for a longer time to delete the
memory with the nutritional values.
The Yellow Buttons
Once you have allocated a FOODCODE to your food you can
use these buttons to display the various contents and values.
Button Contents/Value Unit
SALT Salt mg
FAT Fat g
FIBRE Fibre g
CAL Calories Cal.
BE Bread units
One bread unit = 12g of
carbohydrate
PROT Proteins g
CHOL Cholesterol mg
The value that is currently shown can be read in the
display. This is marked by an arrow underneath. Our
example shows salt.
The WT g/oz Button
Use this button to select the following units of weight: Kg, g,
lb-oz, oz.
If you would like to weigh some water, this can also be displayed
in ml or fl .oz.
The Number Buttons
The number buttons 0-9 are required to enter the code from the
nutrition table.
Using the Scales
Switching On
• Place the scales on a fl at, smooth surface.
• Press the ON/OFF button.
• All segments are briefl y illuminated in the display followed by
„0“ and „0.0“.
Weighing
• Use the WT g/oz button to select the desired unit of measu-
rement.
• Place the items to be weighed on the scales; the weight is
now displayed.
Tare Function
If you would like to add a further ingredient to the fi rst ingredient
and then weigh it:
• Press the ON/OFF button briefl y.
• The scales are reset to „0“.
• If you now place further ingredients on the scales their
weight is displayed.
Displaying the Nutritional Values
ޥ NOTE:
• Before you can display the nutritional values it is necessa-
ry to weigh some food.
• The arrow in the display points to the letters „WT“.
• Press the WT g/oz button if necessary to access the
correct setting.
• In the FOOD CODE display the number „000“ should
appear. If not, press the MC CLR button to delete the old
entry.
• Now weigh your food as described above.
• Place your food on the scales, e.g. an unpeeled apple (code
number 205).
• Use the number buttons to enter the code number. The
number appears in the display under FOOD CODE.
• With the yellow buttons you can now call up the individual
nutritional values.
Using the Memory for the Nutritional Values
With the memory function you can add up the nutritional values
for an entire dish or meal.
• First determine the nutritional values of the fi rst product as
described above, e.g. our apple.
ޥ NOTE:
• Before you can store this and place another food on
the scales it is necessary to return to the weighing
function.
• Press the WT g/oz button to return to the setting.
• The arrow in the display points to the letters „WT“.
05-KWA 3115 32 07.03.2007, 10:11:41 Uhr
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic kwa 3115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic kwa 3115 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info