483939
27
Zoom out
Zoom in
Previous page
1/46
Next page
27
Instructions for use (Figure 3)
Thermostat
The thermostat (IV) is a temperature-dependent switch.
Function switch
Heater
The heat output is determined by the power settings. Up to
3 settings can be selected to optimise the heat output:
Function switch I = 750 W
Function switch II = 1250 W
Function switch I + II = 2000 W
Fan
You can use the fan (III) independent from the heater.
Operation
You can use the appliance for the following applications:
a) Setting the heater appliance to three levels.
The thermostat must be turned on for that purpose.
b) Turning on the fan.
The thermostat must be turned on for that purpose.
c) Turning on the heater and the fan.
The thermostat must be turned on for that purpose.
d) Setting the room temperature.
e) Keeping a room above freezing.
NOTE:
The control lights of the function switch indicate the mode.
Getting the room to the desired temperature
1. Turn the control of the thermostat to the position “MAX”.
2. Turn on one or both function switches of the heater. The
control lights in the switches will be lit.
3. After the desired room temperature has been reached,
slowly turn the control of the thermostat back until the appli-
ance turns off. The control lights will go out.
NOTE:
The thermostat will maintain the set room temperature. The
heater appliance and possibly the fan will automatically be
turned on and off in the process.
Frost protection
NOTE:
The frost protection is dependent on the size of the room.
1. Turn the control of the thermostat as far as it will go to the
position “MIN”.
2. Turn on both function switches of the heater.
In this position, the heater appliance will constantly maintain the
temperature above freezing.
Turning off
1. Turn the function switch off. The control lights will go out.
2. Turn the temperature regulator as far as it will go to the
position “MIN”.
3. Disconnect the power supply from the socket.
Overheating protection
The appliance is tted with an overheating protection, which will
automatically turn off the appliance in case of overheating.
Turn off the function switch. Turn the temperature regulator
to the position “MIN”. Unplug the power cord. Let the appli-
ance cool down for approximately 10 minutes before you
use it again.
Has the appliance become overheated? Check whether
the air intake or vent on the heater is blocked. If necessary,
clear the blockage.
In the event that the overheating protection turns off the ap-
pliance after a brief period, then there is probably a defect.
Turn the appliance off again and unplug it from the mains.
Have the appliance checked by the dealer or by our
service.
Cleaning
WARNING:
Before cleaning, always remove the mains plug and wait
until the device has cooled down.
Do not immerse the device in water. Otherwise this might
result in an electric shock or re.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Wipe off the dust on the appliance with a dry cloth.
A damp cloth (not wet) may be used for the removal of
stains.
Technical Specications
Model: ..............................................................................KH 3433
Power supply: ....................................................... 230 V~, 50 Hz
Power consumption: ........................................................ 2000 W
Protection class: ........................................................................... I
Net weight: ........................................................... approx. 3.85 kg
Subject to change without prior notice!
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and is
manufactured according to the latest safety regulations.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic KH 3433 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic KH 3433 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info