26
It is not intended for applications in agricultural properties or
B & B.
The appliance is only to be used as described in the user
manual. Do not use the appliance for any commercial
purposes.
Any other use is not intended and can result in damages or
personal injuries.
The manufacturer assumes no liability for damages caused by
improper use.
Supplied parts
1 Automatic coffee maker
1 Filter holder
1 Glass coffee pot
1 Coffee pot lid
1 Measuring spoon
Unpacking the appliance
1. Remove the appliance from its packaging.
2. Remove all packaging materials such as lms, ller
material, cable clips and carton.
3. Check the contents for completeness.
NOTE:
Production residue or dust may have collected on the appli-
ance. We recommend cleaning the appliance according to
chapter “Cleaning”.
Controls
1 Brewing strength setting
2 Water tank lid
3 Filter holder
4 Anti-drip valve
5 Water tank
6 Chamber
7 Water level indicator
8 Coffee pot lid
9 Warming plate
10 Display
11
On/Off
12
Programme start time
13 “min” set minutes
14 “h” set hours
15 “AUTO” switch timer operation on/off
Instructions
Placement
• Place the automatic coffee maker on a stable and level
surface. Place the appliance in such way that it cannot tip
over.
• Do not place the appliance in close proximity to a gas or
electric stove or any other heat source.
Electric Connection
1. Ensure that your mains power corresponds with the
specications of the appliance. The specications are
printed on the type label.
2. Connect the mains cable to a properly installed and earthed
220-240 V~, 50 Hz wall outlet.
Operation
Before making coffee for the rst time operate the appliance
twice with clean water only and without paper lter. This
removes dust, which may have collected during transport.
Follow the instructions given under “Switching on the coffee
machine directly”.
Operation
Set the time
Set hours: Repeatedly press the “h” button.
Set minutes: Repeatedly press the “min” button.
NOTE:
Morning and afternoon are indicated by AM or PM.
Preparing the Coffee Machine
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount of cups of
coffee into the rear water tank. The water level is displayed
on the indicator.
NOTE:
• Fill the tank with the coffee pot.
• Set the brewing strength rst.
• Select the range from strong
to weak.
CAUTION:
Do not overll the tank! Do not ll it above the “max” mark.
3. Ensure that the lter holder is properly attached.
4. Turn over the lower fold of the paper lter (size 1x4) and
place it in the lter funnel. Then ll it with coffee powder.
5. Now close the lid of the water tank.
6. Place the pot on the warming plate.
