398831
32
Zoom out
Zoom in
Previous page
1/52
Next page
GB
32
Special safety instructions for this device
Symbols on the Product
On the products you will fi nd symbols that indicate warnings or provide information:
Warning of electric shock!
Do not use this device near baths, wash basins or other
vessels containing water.
Warning: The nozzles become hot during operation.
If the hair dryer is used in the bathroom, remove the mains plug after use as water
represents a hazard. This also applies when the hair dryer is switched off.
Do not put objects, hair or your hands in front of the air intake opening! The device can
suffer damage despite the overheating protection if the airfl ow is blocked!
Please ensure that the inlet grille remains free of fl uff and hairs. Danger of fi re!
As additional protection we recommend the installation of a fault current protection
device (RCD) with a rated current of not more than 30 mA in the wiring system of the
bathroom. Please contact an authorised electrician for advice.
Commissioning
1. Fully unwind the mains cable. Fold the handle down.
2. Make sure that the iron voltage (see name plate) and the mains voltage match. The volt-
age can be changed from 110 V to 230 V by means of the voltage switch on the bottom
of the handle.
3. Fit on a nozzle. You can dry single hair locks by concentrating the fl ow of hot air with
the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair without losing
volume. In order to replace the attachment, fi rst remove the old attachment by pulling it
off and then pushing on the new one until it clicks into place.
4. Insert the plug into a duly installed 230 V/50 Hz protective contact socket.
5. Shift the switch on the handle to one of the desired heat/blowing levels:
Level 0: off
Level 1: medium airfl ow and medium temperature
Level 2: strong airfl ow and high temperature
Switch-off
After use shift the switch to position „0“ and pull out the plug. Leave the device to cool
before putting it away! To this purpose place the device on one side of the housing or
hang it up by the suspension lug.
Fold the handle upwards to save space when storing the device in the see-through bag.
05-HTD 3216 Neu.indd 3205-HTD 3216 Neu.indd 32 01.12.2008 12:04:57 Uhr01.12.2008 12:04:57 Uhr
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic htd 3216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic htd 3216 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info