Manual Clatronic hsm r 2757 (page 33 of 53) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

401468

Zoom out

Zoom in

1/53

Battery operation

You can use your hair and beard cutting machine with the battery once this has

been charged up. The device is partly charged when it leaves the factory. Please

charge the device for a period of 12 hours before using it for the first time. To char-

ge up the device, insert the plug of the power pack into a 230 V/50 Hz socket and

then connect the cable with the connection socket (5) of the charging station (6) or

directly with the device. Move the function switch to the "O" position. The maximum

length of the subsequent charge cycles is approximately 8 hours. When fully char-

ged the device has a maximum operating time of 25 minutes. After this time it must

be switched off and allowed to cool down for 10 minutes. The charging LED lights

up during the charging procedure.

Useful tips regarding battery life

Battery life can be lengthened by paying attention to the following instructions:

• Wait until the battery is almost completely flat before recharging.

• Never leave the machine connected to the charger for more than 24 hours.

• Charge the machine only with room temperature between 0 and +40°C.

Beard trimming and cutting

Shift the selector (2) to the I position. Start with the longest cutting level and trim

your beard gradually to the desired length.

Note: Lock the desired cutting length (cutting length comb) into place with the func-

tion ring (7).

released: It is now possible to adjust the cutting length comb

locked: Now you can cut your hair or beard with the length of the

cutting length comb that has been set

thinning function: The further you turn the function ring in the direction of the

thinning symbol, the fewer hairs are thinned out.

Hair cutting

Shift the selector (2) to the I position: Start with the longest cutting level and shor-

ten the hair gradually to the desired length.

Note: Lock the desired cutting length (cutting length comb) into place with the func-

tion ring (7).

Contour cutting and neck shaving

Remove the cutting length comb (3) and shift the selector (2) to the I position. Turn

the function ring (7) to the position. The shearing head enables the precise trim-

ming of the beard contours even areas, which are difficult to reach, and a clean

shaving of the hairline in the neck area.

5....-05-HSM-R 2757 25.06.2003 10:39 Uhr Seite 33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic hsm r 2757 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic hsm r 2757 Manual

Product: