Manual Clatronic hsm 2685 (page 29 of 58) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

401466

Zoom out

Zoom in

1/58

Special Safety Advice for this Machine

• Only dry hair should be cut with this machine.

• Only use the machine for cutting hair.

• Do not use the device near water (e.g. bathtubs, sinks or other containers filled with

water).

Overview of the Components

1 Adjustment of the cutting length 7 Cutting length accessories:

2 On/off switch a = 3 mm, b = 6 mm

3 Lower blade c = 9 mm, d = 12 mm

4 Upper blade 8 Comb

5 Blade rail 9 Blade oil

6 Voltage adjustment 10 Brush

Using the Machine

Fine Adjustment of the Voltage (Mains operated Machines)

In case of voltage fluctuations in the mains it may be necessary to adjust the

machine. Switch the machine on. Turn the voltage adjustment screw (6) with a screwdriver

or small coin so that the machine runs as quietly as possible.

Preparing for Cutting

1. Briefly comb the hair.

2. Remove the blade protection.

3. Oil the blades slightly.

4. Place a cutting length guide suitable to the desired cutting length. If you are not sure of

the cutting length, start from 12 mm. Insert the blades in the slot and fit the attachment

on the blade.

5. Insert the plug in a duly installed 230 V/50 Hz protective contact socket, switch on the de-

vice and run the device with the guide comb upwards and at a constant speed through

your hair. The guide is held in a level position.

Cutting without Cutting Length Accessory

This is suitable for trimming the hair. The cutting length can be adjusted continuously in the

range of approximately 0 - 2 mm.

For areas which are not accessible to the razor it is possible to use a pair of scissors.

Important: Do not use the device for more than 10 minutes. Allow the equipment to cool

down for 10 minutes, before using it again.

05-HSM 2685 29 21.06.2007, 16:12:25 Uhr mole

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic hsm 2685 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic hsm 2685 Manual

Product: