72230

Clatronic HMS 2739 Manual

27
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
ENGLISH
27
Instructions for Use
Always choose a utensil and a speed according to the following
table:
Product/Type of
Preparation
Max.
Quantity
Utensil Level
Max
Ope-
rating
Time
Heavy dough (e.g.
yeast dough)
500 g
kneader
hook
1 - 4 3 min.
Cake mixture, Dres-
sings, Desserts
750 g beater 2 - 5 5 min.
Sponge mixture, wafer
mixture, Cream
750 g beater 2 – 5 5 min.
Liquids, shakes up to 1 l blender 5 or turbo 1 min.
• With heavy mixtures, do not operate the machine for more
than 3 minutes, and then allow it to cool down for a further
10 minutes.
• Depending on the consistency of the mixture it is necessary
to remove the mixture from the edge of the mixing bowl and
place it back on the kneading attachments. The device must
be turned off.
Releasing the kneading hook / beater
1. In order to release the kneading hook/whisk (10) turn the
power level selector switch to „0“ and ensure that the mixer
has been disconnected from the mains.
2. Press the button (2) to release the kneading hook/whisk.
Remove the device by turning it slightly.
ޥ NOTE:
The hooks can only be removed if the speed switch (3) is in
the „0“ position.
Turbo operation
This is for switching to maximum speed for a short time. Press
at short intervals for pulsed mode operation.
CAUTION:
Do not use this function for more than one minute!
How to use the Blender
1. Turn the power level selector switch (3) to „0“ and ensure
that the mixer (1) has been disconnected from the mains.
2. On the back of the mixer push the cover of the installation
aperture upwards.
3. Place the fast mixing rod on the installation aperture in such
a way that the two arrows are pointing one above the other.
To lock the rod in place, turn it through approximately 90° in
a clockwise direction.
4. Insert the mains plug into a properly installed 230 V/50 Hz
safety power socket.
5. Place the fast mixing rod into a high-walled, partly-fi lled
vessel.
CAUTION:
Do not operate the fast mixing rod when the vessel is
empty, i.e. when there is no food in the vessel to be mixed.
6. Select a speed using the power level selector switch (3).
Move the fast mixing rod slightly up and down.
7. When you would like to stop mixing, turn the power level
selector switch to „0“ and unplug the device from the mains.
How to use the Kneader hooks/beater
1. Turn the power level selector switch (3) to „0“ and ensure
that the mixer (1) has been disconnected from the mains.
2. Press the end of the kneader hooks/beater (10) into the cor-
responding mixer openings until the hooks click into place.
While pressing, turn slightly in order to facilitate the whole
operation.
ޥ NOTE:
Please note that the kneading hook with the curved was-
her on the shaft can only be inserted on the left-hand side
of the mixer when viewed from the bottom.
3. Insert the mains plug into a properly installed 230V/50 Hz
safety power socket.
4. The handmixer (1) can be used at various speeds set with
the speed regulator (3).
How to use the Mixer stand
Please select a fl at non-slip surface for the mixer stand.
1. Place the hand mixer (1) on the upper section (5) of the
mixer stand (11). Please check whether the clip (12) of the
upper section is locked in place on the back of the mixer.
2. Mount the hooks as described above in the section “How to
use the Kneader hooks/beater”.
3. In order to place the mixing bowl (8) underneath, pull the clip
(6) to unlock the upper section of the mixer stand (5) and
fold the mixer upwards.
4. Place the mixer bowl fi lled with the desired ingredients onto
the revolving plate (7). Now fold the mixer down again.
5. Insert the mains plug into a properly installed 230V/50 Hz
safety power socket.
6. The handmixer (1) can be used at various speeds set with
the speed regulator (3).
7. The revolving plate turns automatically!
8. When you would like to stop mixing, turn the power level
selector switch to „0“ and unplug the device from the mains.
9. When you have fi nished pull the clip (6) again to unlock
the upper section of the mixer stand (5) and fold the mixer
upwards.
10. Now the mixer bowl can be removed. Remove the hooks
as described above in the section “Releasing the kneading
hook / beater”.
11. In order to separate the mixer from the upper section (5) of
the mixer stand, pull the mixer upwards.
Cleaning
• Before cleaning the equipment, always remove the mains
plug from the socket.
• Only a damp cloth should be used for cleaning the outside
of the machine.
• Under no circumstances should the device be immersed in
water for cleaning.
05-HMS 2739 New.indd 2705-HMS 2739 New.indd 27 04.06.2008 10:05:11 Uhr04.06.2008 10:05:11 Uhr
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic HMS 2739 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic HMS 2739 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info