For the connection values please see the technical data contained in these instruc-
tions.
Instructions for use
Use
• The device is intended for private use only.
• Clean machines, vehicles, buildings, tools, facades, terraces, garden tools etc.
with the high-pressure water jet. If necessary you can also use detergents.
Please use detergents sparingly, noting the quantities recommended by the
producer.
Please note:
• The cleaning of motors/engines and other surfaces that may be covered with oil
is only allowed in conjunction with an appropriate oil separator.
• Do not clean any surfaces that may contain hazardous materials, such as asbe-
stos.
Water
• If necessary, clean the supply water with a water filter. Any impurities in the
water could damage the pump.
• Operating the high-pressure cleaner without water will damage the pump.
Please ensure before switching on the cleaner that the water supply is availa-
ble.
Bleeding the Device before Use.
• The device must be connected to the electricity and water supply (See
"Connection", points 1-3 in the section "Operation").
• Unscrew the high-pressure hose (7) from the high-pressure connection (2) of
the device.
• Switch on the device and allow it to run until the water coming out of the high-
pressure connection no longer contains any bubbles.
• Switch off the machine at the main switch (1) and screw the high-pressure hose
(7) back on.
Cleaning Method
1. Spray the detergent sparingly on to the dry surface. Allow it to act for a short
time without letting the detergent dry.
2. Rinse off the loosened dirt with the high-pressure jet.
Water Loss
It is normal for the pump to lose small quantities of water. If there is a sizeable leak,
please contact our service department.
57
GB
