653925
25
Zoom out
Zoom in
Previous page
1/44
Next page
25
HAS3659_IM 21.07.16
This appliance is not intended to be immersed in water during
cleaning. Please observe the instructions that we have included for
you in the chapter “Cleaning”.
Delivery Contents
1 Main body
1 Small round brush
1 Large round brush
1 Volume brush
Assembly / Disassembly of Attachments
WARNING: Risk of burns!
If you want to change an attachment directly after use, let
the appliance cool down rst!
Refer to the markings on the main unit and the attachments.
1. Select a desired attachment. Insert the attachment so
that the arrow on the base unit
and the arrow on the
attachment are aligned precisely above each other.
The attachment must audibly engage.
2. To unlock the attachment, hold the button below the arrow
pressed and pull the attachment upwards.
Commissioning
Remove all packaging material.
Unwind the mains cable completely.
Fit one attachment.
Electrical Connection
Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the device.
You can nd this information on the nameplate.
Connect the appliance to a properly installed earthed
socket.
Use
Switch Positions
The device has a switch with 4 settings. The markings are
located next to the slide switch. You can select the following
functions:
0 = off
1 = moderate air ow, medium temperature
2 = strong air ow, high temperature
= strong air ow, low temperature
Using the Round Brushes
The round brushes feature different diameters. Select a brush
according to the desired size of curls.
Comb your hair and separate it into single strands.
Twist one hair strand around the brush starting from the
tips all the way to the hairline. Keep holding the device in
that position for several seconds until the desired degree
of drying and styling has been achieved.
Then unwind the hair strand again. Blow-dry your hair
strand by strand.
Application of the Volume Brush
With the volume brush you can create volume and fullness
in your hair.
After Use
Let your hair cool down completely before continuing to
style it.
Do not comb your hair afterwards if you want to keep the
curls strong. Just use your ngers for styling.
Switch-off
After use, slide the switch to position “0” and disconnect from
the mains.
Storage
Leave the device to cool before putting it away!
To do so, place the appliance onto one side of the housing
or hang it up by the suspension eye.
Mains Cable
The mains cable should only be wound up loosely.
Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
Check the mains cable regularly for damages.
Cleaning
WARNING:
Before cleaning remove the mains lead from the socked.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic HAS 3659 Hot Air Styler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic HAS 3659 Hot Air Styler in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info