814176

Clatronic FW 3151 Manual

29
Zoom out
Zoom in
Previous page
1/48
Next page
33
Arrangement of control elements
1 Filling tray 9 Knife
2 Motor 10 Plug
3 Switch ON/0/R (On/Off/
reverses)
11-13 Perforated discs
14 scroll
4 Safety switch „Forward/
reverse“
15 scroll housing
16 Pusher
5 Screw 17 Connection scroll
housing
6 Threaded hole
7 a + b Attachment
„Kebbe“
Without illustration
8 Sausage attachment 2-part cookie attachment
Intended use
This appliance serves
- Cut up foodstuff
- You can shape noodles or dough with different
attachments.
It is exclusively intended for this purpose and may be only
used appropriately.
It may only be used in the manner described in these
operating instructions.
You may not use the appliance for commercial purposes.
Use for any other purpose is considered improper and
not for the intended purpose and can result in damage to
property and personal injury.
Clatronic International GmbH is not liable for damages
caused by non-intended use.
Assembly of the meat grinder
Please also observe our illustrations under "A".
1. Insert the scroll housing into the mounting on the motor.
2. Lock the scroll housing into position with the screw.
3. Insert the scroll.
4. Insert the knife with the sharpened edge outwards onto
the shaft of the scroll.
5. Select a perforated disc.
NOTE
:
• Slightly grease the perforated discs beforehand with
vegetable fat.
• The guides on the perforated disc are located in the
recesses on the scroll housing.
6. Rotate the catch clockwise.
7. You can now attach the fi lling tray with whatever you
want to grind.
See below "Electrical connection".
Mounting of the "Kebbe" attachment
NOTE
:
Tubes of meat or dough paste can be made with the
"Kebbe" attachment.
Please also observe our illustrations under "B".
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 3.
1. Position the 2-piece Kebbe attachment on the shaft of
the scroll.
NOTE
:
The guides on attachment (A) are located in the recesses
on the scroll housing.
2. Rotate the catch clockwise.
3. You can now attach the fi lling tray with your meat or
dough mixture.
See below "Electrical connection".
Assembly of the sausage attachment
Please also observe our illustrations under "C".
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 5.
1. Position the sausage attachment on the scroll housing.
2. Rotate the catch clockwise.
3. You can now attach the fi lling tray with whatever you
want to grind.
See below "Electrical connection/Application instructions".
Assembly of the cookie attachment
NOTE
:
You can shape different forms with this attachment after
preparing a cookie dough. This is particularly suitable for
so-called Spritzgebäck.
First proceed as described in "Assembling the meat
grinder" Item 1 to Item 3.
1. First, insert the disc onto the extension of the scroll
shaft.
NOTE
:
The guides are located in the recesses on the scroll
housing.
2. Then mount the shaping disc.
3. Rotate the catch clockwise.
4. You can now attach the fi lling tray with your dough.
See below "Electrical connection/Application instructions".
ENGLISH
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic FW 3151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic FW 3151 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info