814197

Clatronic FR 3782 H Manual

11
Zoom out
Zoom in
Previous page
1/54
Next page
FR3782H_IM 06.05.22
11
Setting the Temperature and Cooking Time
There are 2 buttons and on the appliance.
• Use the or button next to the symbol to set the
temperature (80 – 200 °C).
• Use the or button next to the symbol to set the
cooking time (1 – 60 minutes).
• The display alternates between the temperature and the
cooking time.
Automatic Programmes
Mode Pre-set
temperature in °C
Pre-set time
in minutes
Pizza (warm up) 200 8
French fries 200 22
Steak 180 18
Shrimps 180 12
Fish 180 14
Chicken leg 180 21
Vegetables 180 15
Ribs 180 20
• These shall be considered as guide values. Depending
on the size and weight, the time and temperature may be
longer and higher or shorter and lower.
• Also observe the information on the food packaging.
• You can also adjust the pre-set temperature and cooking
time of the automatic programmes.
Using the Appliance
1. Make sure that the appliance is disconnected from the
mains.
2. Pull the frying container out of the appliance by the
handle.
3. If necessary, place the sieve insert with the silicone
nubs in the appliance. Push the sieve insert all the way
down.
4. Push the frying container back into the appliance. It
must lock into place.
5. Plug the appliance into a properly installed earthed
socket. A beep sounds and all symbols light up briey.
The button lights up.
6. Press the button to exit standby mode. The appliance
is pre-set to 200 °C and 18 minutes.
7. We recommend preheating the appliance for about
4 minutes. To do this, use the or buttons to set
the required temperature and cooking time to 4 minutes.
8. Press the button to start the cooking process.
9. After the time has elapsed, 3 signals sound and the
appliance switches to standby mode.
10. Pull the frying container out of the appliance by the
handle.
11. Place the frying container on a heat-resistant surface.
12. Fill the frying container with the desired food.
13. Push the frying container back into the appliance.
14. Press the button again to exit standby mode.
15. Select an automatic programme or set the cooking time
and temperature individually using the or buttons.
16. Press the button to start the cooking process.
17. If necessary, shake the food halfway through the
cooking time. To do this, pull out the frying container by
the handle.
18. Push the frying container back into the appliance.
Interrupt Use
• Press the button to pause the operation. If you want
to resume operation, press the button again within
60 seconds.
• In addition, operation is interrupted when you pull out
the frying container. Put the frying container back in to
resume operation.
• The appliance will start from the spot it has been paused.
If, however, you pull out the power plug, your current
settings will be lost. When inserting the power plug
and pressing the button the appliance will show the
pre-adjustment again.
End of Use
1. After the cooking time has elapsed, the appliance auto-
matically switches to standby mode. 3 signals sound.
2. Pull out the frying container by the handle.
3. Put the food in a heat-resistant bowl.
4. Push the frying container back into the appliance.
Cleaning
WARNING:
• Always switch off the appliance and disconnect the mains plug
from the socket before cleaning. Wait until the appliance has
cooled down.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic FR 3782 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic FR 3782 H in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info