Manual Clatronic FR 3649 (page 37 of 64) (English, German, Dutch, French, Italian, Polish, Spanish)

814191

Zoom out

Zoom in

1/64

CAUTION: Overload!

• If you use extension cords, they should have a conduc-

tor cross-section of at least 1.5 mm2.

• Do not use any multiple sockets, as this appliance is too

powerful.

Power On / Off

With the temperature control (8) in the position “•”, the appli-

ance is switched off.

Set the desired temperature with the temperature control (8).

Use

1. Make sure that the appliance is disconnected from the

mains and is switched off (the pilot lamps (10) / (11) are off).

2. Press the button (7) to open the lid of the appliance.

3. To remove the frying basket (12), reach into the depression

and pull the frying basket handle (13) up, until it latches.

4. Fill the deep-drying fat container with oil or fat (4) (max.

2.5 liters). The lling level must be between the min. and

max. marks.

5. Connect the plug to a properly installed safety plug

socket.

6. Set the desired temperature with the temperature control

(8). Both pilot lamps (10) / (11) light up.

7. Close the lid (3) during the heating phase. The heating

pilot lamp goes out when the set temperature has been

reached.

8. Fill the deep-frying basket (12). Open the lid (3) and hang

the basket (12) with the deep-fried products in the recess.

9. Close the lid (3). Loosen the handle (13) by sliding the

button (14) on the handle. The deep-frying basket (12) is

now in the hot fat.

NOTE:

The heating pilot lamp (10) is switched on and off several

times during the deep-frying. This is normal and indicates

that the temperature is being thermostatically controlled

and maintained.

10. After the deep-frying time has passed, open the lid (3)

carefully.

WARNING:

Hot steam may escape.

11. Now remove the deep-frying basket (12).

12. You can let the oil drip off the deep-fried products for

some time. For this, hang the deep-frying basket (12)

with the holder (15) on the edge of the deep-frying fat

container (4).

Ending Operation

1. Turn the temperature control (8) counterclockwise to the

“•” position.

2. Disconnect the mains plug from the socket.

3. Let the frying cool down for a considerable time. Check

that the temperature is safe before handling the lled

deep-frying fat container (4) any further.

Cleaning

WARNING:

• Always pull out the plug from the mains socket before cleaning and

wait until the appliance has cooled down.

• Never immerse the housing in water. Doing so may result in an

electric shock or re.

CAUTION:

• Do not use a wire brush or abrasives for cleaning.

• Do not use abrasive or aggressive cleaners.

Deep-frying fat container and housing

• Pull off the lid (3) in upward direction.

• To change the oil, pour out the oil to the side.

• After use, clean the deep-frying fat container (4), the

deep-frying basket (12), the housing (5) and the lid (3)

with a moist cloth. Possibly, you should use household

detergent.

Odor and fat vapor lter

• Wipe the lter in the lid with a moistened cloth and a little

household detergent.

Storage

• Clean the appliance as described above and let it dry

completely before using it again.

• During longer periods of non-use we recommend storing

the appliance in its original packaging.

• Always keep the appliance at a well-ventilated and dry

location, out of the reach of children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic FR 3649 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic FR 3649 Manual

Product: