714086
40
Zoom out
Zoom in
Previous page
1/64
Next page
40
PORTUGUES
PORTUGUES
ČESKY
ČESKY
CAUTION:
The product must not be immersed into water for cleaning.
Please follow the instructions as outlined in the chapter “Cleaning
and Storage”.
Initial Operation
Remove all parts carefully from the packaging.
Clean the appliance before rst use as described under
“Cleaning and Storage ”.
Mains Cord
Unwind the mains cord from the base.
Electric Connection
Ensure that your mains power corresponds to the appli-
ance’s specications on the type label.
Operation
NOTE:
You can boil up to 7 eggs concurrently.
1. Place the appliance on a at, level and dry surface. The
surface should be non-slip and heat resistant.
2. Fill the supplied measuring cup fully with cold water and
pour it into the egg boiler.
3. Insert the egg holder.
4. Pierce each egg at the bottom with the egg piercer at the
bottom of the measuring cup to avoid cracking. Carefully
press the egg on the piercer.
5. Place the eggs with the pierced side up evenly spaced in
the egg holder.
6. Close the hood.
7. Connect the power plug to a properly installed wall outlet.
8. Set the hardness control to the desired position as de-
scribed under “Hardness Setting”.
9. Turn the appliance on. The status indicator lights up.
10. The acoustic signal sounds as soon as the eggs reach the
desired hardness. Turn the appliance off and disconnect
from mains power supply.
11. Remove the hood only by taking hold of the handle.
WARNING: Risk of scalding!
When opening, tilt the hood in such way that the steam
escapes from the side opposite the handle.
12. Remove the egg holder from the egg boiler and chill under
cold water to avoid further cooking.
13. Let the appliance cool down completely before further use
or storage!
Hardness Setting
NOTE:
The hardness control sets the boiling time and therewith the
hardness of the eggs. The icons serve your orientation.
Icons for “boiling eggs with the same hardness”
Soft eggs medium hard eggs hard eggs
Icons for “concurrent boiling of soft, medium and hard
eggs”
medium hard eggs hard eggs
Boiling Eggs with the Same Hardness:
Within the desired hardness the setting is determined by
number and weight class of the eggs (S, M, L, XL).
Examples:
1 small egg (weight class S) is to be soft
boiled:
- Set hardness control with the notch to
the onset of the boiling range for soft
eggs.
1 large egg (weight class XL) or 7 small
eggs are to be soft boiled:
- Set hardness control to the centre of
the boiling range.
7 large eggs are to be soft boiled:
- Set hardness control to the end of the
boiling range.
Try the different settings. Thanks to the electronic boiling control
you will be able to get excellent results after a short time.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic EK 3321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic EK 3321 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info