Manual Clatronic DVG 3686 (page 36 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

814204

Zoom out

Zoom in

1/62

DVG3686_IM 29.08.17

• Keep the appliance and its cord out of reach of children less than

8 years.

CAUTION:

This appliance is not intended for immersion in water during

cleaning. Please refer to the instructions provided in the chapter,

“Cleaning”.

Intended Use

This appliance is used for grilling doner kebab / gyros, meat /

vegetable skewers or poultry.

It is intended for the use in private households and similar

applications. The appliance is only to be used as described

in the user manual. Do not use the appliance for any other

purpose.

Any other use is not intended and can result in damages or

personal injuries.

The manufacturer assumes no liability for damages caused

by improper use.

Unpacking the Appliance

1. Remove the appliance from its packaging.

2. Remove all packaging materials such as lms, ller mate-

rial, cable clips and carton.

3. Check the contents for completeness.

4. In case of incomplete delivery or damage, do not operate

the appliance. Return it to your dealer immediately.

NOTE:

Production residue or dust may have collected on the appli-

ance. We recommend cleaning the appliance according to

chapter “Cleaning”.

Overview of the Components /

Scope of Delivery

1 Reector sheet

2 Gear rim (6 pieces)

3 Kebab skewers (6 pieces)

4 Gearbox with traverse

5 Skewer

6 Rotisserie for kebab skewers

7 Grease drip tray

8 Switch (On / Off)

9 Base

10 Motor shaft with notch

11 Clamp spring for reector sheet

12 Heating element

13 Traverse

14 Locking screw

15 Securing bracket

Assembly

Please take a look at the illustrations on page 3.

Figure A

1. Push the reector sheet between the heating element

and the housing rear panel. The reector sheet’s side

guide rails have to be placed into the lateral recesses of

the housing. Place the reector sheet in front of the clamp

spring. Check that the reector sheet is rmly placed.

2. Put the grease drip tray above the motor shaft at the

center of the appliance.

3. Hold the rotisserie with the tip pointing upwards. Place the

bottom end of the rotisserie into the motor shaft in such a

way that the catch snaps into the notch. You may need to

twist the rotisserie a little.

Figure B

Secure the gearbox with the traverse at the appliance:

1. Loosen the locking screw at the traverse.

2. Slide the traverse with the screw into the securing brack-

et’s recess.

3. Slightly tighten the screw.

4. Place the gearbox onto the tip of the meat skewer. You

may need to twist the gearbox a little.

5. Insert bottom of the traverse into the notch in the center of

the housing rear panel.

6. Hand-tighthen the locking screw.

Notes on Use

Electric Connection

1. Ensure that the switch (8) is set to “ “ position.

2. Before inserting the power plug into the outlet, check

that the mains voltage to be used matches that of the

appliance. You can nd the required information on the

nameplate.

3. Connect the mains plug to a properly installed shockproof

socket only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DVG 3686 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic DVG 3686 Manual

Product: