424777
37
Zoom out
Zoom in
Previous page
1/48
Next page
37
Changing system settings
Select the ”Configuration“ menu.
You can carry out the following settings in the sub-
menus:
ENGLISCH
Attention!
Select only the option ”on“ with ”active antenna“,
if you connect an active DVB-T antenna.
Otherwise, the receiver or antenna may be dama-
ged.
Setting Options Explanation
OSD Theme 1-5 You can select the OSD menu background colour.
Time on OSD OFF/ON You can select whether time is to be permanently displayed.
OSD Time out 1-6 Select the time after which the OSD is to fade out.
OSD Trans 0%-60% Select the transparency of the OSD menu.
OSD Language You can select the required language for the screen menu.
MP4 subtitles language Here you can select the preferred subtitle language for MPEG4 files.
1st Audio language You can select the first and second audio language.
2nd Audio language
Display mode auto/ If you are not sure which TV standard
PAL/NTSC is suitable, select ”Auto“.
Aspect ratio 4:3 LB/4:3PS/16:9 Select between 4:3 format or 16:9 format (wide screen) according
to your screen.
4:3 LB: transmissions in wide screen format are fully displayed. You
will see black margins on the top and the bottom of the screen.
4:3 PS: Transmissions in wide screen format are altered in such a way
that the most important part of the picture is always in the centre of a
4:3 picture.
16:9: Select the 16:9 format with a wide screen TV.
Video output RGB/CVBS Select the suitable video signal (RGB or CVBS).
Brightness, contrast, Adjust brightness, contrast, hue and saturation
hue, saturation
EQ Setup Standard/classic/ You can select the required sound option.
Rock/Jazz/POP
Surround off/concert/ this function creates different acoustics for a specific surrounding,
church/passive/live e.g. at a concert or in a church.
active antenna off/on when ”off“, no voltage is connected to the antenna output – suitable
for connection to the roof antenna and the passive DVB-T antenna.
When ”on“ an active DVB-T antenna without its own power supply can
be connected.
JPEG effect off/on You can select whether in the photo mode each picture is faded in with
each picture change.
LCN off/on If supported by TV channels, with the LCN function switched on,
your regional channels are saved sorted, independent from their frequency.
If the LCN function is activated the programme slot numbers are also moved.
Area Select your country.
Timer Mode Here, you can set the time of the receiver
(see‚ Change time settings’ section).
Wake up Timer Here, you can programme the timer or change/delete existing programmes.
Change/delete programming
Parental Lock Here, you can change the pin code of the receiver. The code preset by the
factory is ‘0000’.
ÖCarry out the desired settings.
CL_BDA_DVB_T774_GB_ka2.qxd 08.01.2008 17:26 Uhr Seite 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic dvb t 774 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic dvb t 774 in the language / languages: English, German as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info