Manual Clatronic dr 2930 (page 26 of 42) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

382299

Zoom out

Zoom in

1/42

ENGLISH

Initial Operation

Filling up the Heating Boiler before Use!

CAUTION:

• Before the tank lock is opened the power plug must

be removed from the socket. Please make sure the

device is depressurized by pressing the steam switch.

• Before unscrewing the lock (3) proceed as follows:

1. Remove the power plug from the socket.

2. Release the pressure by using the steam switch (4).

3. If the device is still warm, please wait 5 minutes before

removing the seal completely. Press the seal downwards

and turn.

WARNING:

• Danger of Injury!

• Please open the safety lock (3) only when no more

steam comes out of the nozzle.

4. Shake any residual water out of the kettle (1). Then ﬁ ll the

measuring beaker (8) and pour the water into the kettle. Use

a funnel if necessary. Re-fasten the safety lock (3).

Attachment of the Individual Accessories

Brush (10) and Angle Attachment (11)

Both attachments can be joined to the nozzle attachment (12)

on the hexagonal section.

Nozzle Attachment, Hose, Cleaning and Non-woven Fabric

Attachment

1. Before attaching the accessories please look at the ope-

nings on the connecting nozzle. The pins on the accessory

must be in line with the openings of the connecting nozzle.

Push the accessory on to the device as far as it will go.

2. Turn the accessory through approximately 90° in a

clockwise direction. The accessory remains locked in this

position.

3. The nozzle attachment can be used on the hose or directly

on the device.

4. The hose (7) must be attached to the connection nozzle (2).

The nozzle attachment and the universal cleaning attach-

ment (13) can be ﬁ xed to the end of the hose. The universal

cleaning attachment should be used either together with

the non-woven fabric attachment (9) or with the window

cleaning attachment (14). The non-woven fabric attachment

is intended for cleaning sensitive surfaces such as sofas

and armchairs.

5. The window cleaning attachment (14) is hooked under the

cleaning attachment (13).

Attachments:

Nozzle attachment: for cleaning crevices, for

example, bathtub edges etc.

Brush attachment: for areas which are difﬁ cult

to access.

Angle attachment: for areas which are difﬁ cult

to access, e.g. radiators.

Non-woven fabric attachment: protective non-woven fabric

attachment for sensitive

surfaces.

Window cleaning attachment: for window cleaning, shower

cabinets etc.

Universal cleaning attachment: for larger surfaces such as

glass panes or tiles.

Switching on the Device

• Before inserting the mains lead into the socket, check

whether the voltage you intend to use complies with that of

the machine. For details see the machine label.

• Only connect the machine to a properly installed safety

socket, 230 V/50 Hz.

• After about 3-4 minutes the pressure in the boiler has built

up. Please press the steam switch (4) to produce steam.

Filling up the Water Boiler when using the Device

If there is no more water in the vessel no steam is emitted when

the steam switch (4) is pressed. The water has to be ﬁ lled up

as follows:

1. Pull the power plug out of the socket!

2. Wait for approximately 5 minutes and release the resi-

dual pressure with the steam switch!

WARNING:

Unscrew the safety lock (3) slowly and wait for a few

seconds before opening it completely until the excess

pressure has escaped.

4. Fill fresh water from the measuring beaker (8) by means of

the funnel into the boiler. Do not overﬁ ll! Do not exceed the

amount of water indicated on the measuring beaker! Take

care of water splashes that might come out of the boiler. In

order to prevent the water from splashing it should be ﬁ lled

into the funnel slowly after the safety lock has been opened.

5. Fasten the safety lock again.

6. Insert the power plug back into the socket.

Cleaning and Maintenance

WARNING:

Cleaning and maintenance must only be carried out when the

power plug is removed from the socket.

• Before putting the device away or cleaning it, it has to be

allowed to cool down completely.

• Please clean the device and the accessories only with a

slightly moist cloth.

• Do not use strong cleaning agents of solvents for cleaning.

• In order to guarantee a long and trouble-free working life,

lime residues have to be rinsed out of the boiler once a

month. Please do not use vinegar or other anti-liming

agents.

05-DR 2930 NEU.indd 2605-DR 2930 NEU.indd 26 25.02.2009 16:19:53 Uhr25.02.2009 16:19:53 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic dr 2930 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic dr 2930 Manual

Product: