592082

Clatronic DO 3087 Manual

39
Zoom out
Zoom in
Previous page
1/62
Next page
GB
39
Overview of the Components
1 Knife, scissor sharpener
2 Housing
3 Cable compartment/Connection cable with mains plug
4 Cutting lever
5 Adhesive magnet
6 Cutting blade
7 Transport wheel
8 Pushbutton
Initial Operation
Connection
• The mains voltage must correspond to the voltage stated on the type plate of the tin
opener.
• Pull the mains lead on the rear out of the cable compartment (3).
• Connect the device to a correctly installed 230 V, 50 Hz shockproof socket.
Before Initial Use
• Clean the tin opener (see “Cleaning and Care“).
• When the tin opener is switched on a clicking noise may be heard. This noise does not
affect the function of the tin opener.
• Tins weighing more than approximately 1000 g have to be guided by hand during the
cutting operation.
• Tins that have a damaged edge may have to be placed on the tin opener more than once.
• Tins that are soldered or should normally be opened with a key have to be opened on
the bottom if a suitable edge is present.
Operation
• It is possible that during initial operation of the tin opener it only functions perfectly after
the cutting lever has been operated a few times (due to the protective grease).
• Lift the cutting lever (4) with your right hand.
• Now place the tin which is to be opened on the side of the cutting mechanism with your
left hand so that the lower side of the cutting edge is located on the toothed transport
wheel (7).
• Press the cutting lever (4) downwards until the cutting blade (6) touches the surface of
the tin lid. Bring the magnet (5) into position by pressing down over the lid of the tin.
05-DO 3087 39 05.12.2006, 8:30:43 Uhr
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic DO 3087 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DO 3087 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info