Manual Clatronic DO 2852 (page 29 of 46) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

484796

Zoom out

Zoom in

1/46

Before Initial Use

• Clean the tin opener (see “Cleaning and Care").

• When the tin opener is switched on a clicking noise may be heard. This noise

does not affect the function of the tin opener.

• Tins weighing more than approximately 1000 g have to be guided by hand

during the cutting operation.

• Tins that have a damaged edge may have to be placed on the tin opener more

than once.

• Tins that are soldered or should normally be opened with a key have to be ope-

ned on the bottom if a suitable edge is present.

Operation

• It is possible that during initial operation of the tin opener it only functions per-

fectly after the cutting lever has been operated a few times (due to the protec-

tive grease).

• The tin opener is designed for short-term use only (3 minutes), i.e. you can use

the tin opener for a maximum of 3 minutes without interruption. Then the ope-

ner has to be switched off in order to cool down. After being allowed to cool

down for a sufficient time the tin opener can then be used again.

• Take the tin opener in your right-hand and lift the cutting lever (4) with your

thumb.

• Now place the tin which is to be opened on the side of the cutting mechanism

with your left hand so that the lower side of the cutting edge is located on the

toothed transport wheel (7).

• Press the cutting lever (4) downwards until the cutting blade (6) touches the

surface of the tin lid. Bring the adhesive magnet (5) into position by folding it

down over the lid of the tin.

• When the cutting lever (4) is pushed down further the pushbutton (8) is opera-

ted and the tin opener switches on. The cutting blade (6) is automatically pulled

into the tin lid and cuts it open.

• The opening procedure can be interrupted at any time by lifting the cutting lever

(4).

• After the tin has been opened, hold it tightly in your left hand and lift the cutting

lever (4) with the thumb of your right hand.

• The lid of the tin which has now been cut off is held by the adhesive magnet (5)

and can be removed by hand.

• Please be careful when removing the lid of the tin from the adhesive magnet

(5). Thin tin sheet can easily cause injuries.

Cleaning and Care

• The housing of the tin opener can be cleaned externally with a slightly moist cloth.

• Do not use any acidic or abrasive detergents.

5....-06-DO 2852 13.04.2004 12:37 Uhr Seite 29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DO 2852 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic DO 2852 Manual

Product: