Manual Clatronic DKP 3583 (page 25 of 48) (English, German, Dutch, French, Italian, Polish, Spanish)

653876

Zoom out

Zoom in

1/48

Unpacking the appliance

1. Remove the appliance from its packaging.

2. Remove all packaging materials such as lms, ller mate-

rial, cable clips and carton.

3. To prevent hazards, check the appliance for any transport

damage.

NOTE:

Production residue or dust may have collected on the appli-

ance. We recommend cleaning the appliance according to

chapter “Cleaning”.

Attaching the handles

The handles can be attached to the left and right side respec-

tively.

The handles feature clamps that t into the openings of the

housing.

• Push the clamps into the housing and secure by using the

screws provided.

Electrical Connection

Connected load/wattage

The hob can take up an overall load of 2500 W. Because of

this high connected load it is recommended to use a separate

connection protected over a 16 A safety switch.

CAUTION: Overload!

Do not use extension cables or multiple sockets as the power

consumption of this device is too high for these.

Connection

• Before inserting the mains plug into the socket check

whether the voltage which you intend to use corresponds

to that of the machine. Please see the label on the machine

for details.

• Only connect the machine to a correctly installed safety

socket.

Apply the following description to both hot plates:

Initial Operation of the Unit

Before rst use, operate the unit for 5 minutes to remove the

protective coating of the hotplate. Set the thermostatic control-

ler to MAX.

NOTE:

Occurrence of light smoke and odours is normal with this

procedure. Take care of suitable ventilation.

Using the Hotplate

Switching on/off

The unit is switched on with the thermostatic controller.

The unit is switched off when the thermostatic controller is set

to MIN.

Notes for cooking utensils

• For optimum use of energy, use only pots/pans with a at

bottom (see Fig.).

• The cooking utensil never should be smaller than the hot-

plate. This wastes energy. In extreme cases, the hotplate

can become distorted.

Operation

Use the thermostatic controller to select the temperature of the

hotplate according to the purpose:

Notch 1: Warming up

Notch 2: Warming up/simmering

Notch 3: Simmering

Notch 4: Frying

Notch 5: Parboiling, browning

Notch MAX: Browning, quick heating

NOTE:

The pilot lamp indicates the heating up of the hotplate. It is

switched on and off during operation. This is normal and

indicates that the temperature is controlled and maintained

by the thermostatic controller.

Switching Off

• Set the thermostatic controller to MIN.

• Remove the mains plug from the socket.

• Let the unit cool down before storing it.

WARNING: Hazard of burns!

Because of the heat radiated during cooking, dangerously

high temperatures may occur at the cooking zone after the

cooking cycle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DKP 3583 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic DKP 3583 Manual

Product: