113239
33
Zoom out
Zoom in
Previous page
1/54
Next page
ENGLISH
ENGLISH
33
Steam Ironing
WARNING:
The steam brush and the iron eject a large quantity of hot
steam. Danger of burns.
CAUTION:
When using the steam iron please ensure that the water tank
is always fi lled to the required level. Operating the device
without water will damage it.
Fill the tank up to the maximum mark. Do not overfi ll!
Close the water tank and put it back on the base.
Connect the base station to a 230 V / 50 Hz socket with
earthing contact.
Turn on the switches (11) and (12).
Set the desired temperature.
When the control lamp (9) on the base lights up you can
start ironing.
Press the steam jet button if necessary.
ޥ NOTE:
Keep a cloth ready! At fi rst water may also be expelled from
the soleplate of the iron.
How can I replenish the water during operation?
Refi ll with water before the tank is completely empty. The lamp
(10) shows that there is not enough water.
Place the iron on the heel rest.
Turn off the steam with the switch (11).
You can remove the tank and then fi ll it up.
Replace the tank on the base. You can now continue
operation.
Operating the steam Brush
WARNING: DANGER OF BURNS!
Particularly when using the steam brush it is advisable to
protect yourself, e.g. by means of protective goggles, long-
armed clothing, gloves etc.
Please also note our other warnings and instructions for
use.
ޥ NOTE:
The steam brush has a catch with which you can remove the
brush attachment.
You can use the steam brush to refresh or remove creases from
the clothes, or brush them off under steam.
For this purpose it is best to put your clothes on a hanger.
While you are using the brush, guide it gently over the
laundry.
If you are using only the jet of steam the distance should be
approximately 2-3 cm.
When you have fi nished
After use, always turn the temperature control to „MIN“ (the
control lamp in the handle of the iron goes off).
Turn the switches (11) and (12) off.
Remove the mains plug from the socket.
Empty the water tank.
Allow the device to cool down before you put it away.
Cleaning
Always remove the mains lead before cleaning!
Wait until the machine has cooled down completely.
Clean the casing with a slightly damp cloth.
Clean the sole plate and the rest with a slightly damp cloth.
Do not use any abrasive cleaning agents!
The device must never be immersed in water!
Troubleshooting
Fault Possible Cause Remedy
Device does not
work
Faulty mains socket Try another socket
Loud noises
during steam
operation
The tank is empty Check the tank
During steam
operation water
is also expelled
• The temperature
control on the iron
is set too low
• It is possible that at
rst water will also
be expelled
• Select a higher
temperature
• Press the steam jet
button for approx.
1 minute until no
further water comes
out
The device
suddenly stops
working during
operation
Is the electric circuit
overloaded?
Check the house fuse
Technical Data
Model: .........................................................................DBS 3187 R
Power supply: ............................................................230 V, 50 Hz
Power consumption: .......................................................... 2100 W
Protection class: ........................................................................... Ι
Maximum fi lling quantity of the water tank: ...................... 1,2 litres
Net weight: ...........................................................................3,7 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
05-DBS 3187 R.indd 3305-DBS 3187 R.indd 33 21.09.2007 10:48:33 Uhr21.09.2007 10:48:33 Uhr
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic DBS 3187 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic DBS 3187 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info