323249
47
Zoom out
Zoom in
Previous page
1/74
Next page
GB
47
6. Turn operating switch I (10) on the station to position 0 and move the steam
regulator (9) to MIN. Please ensure that operating switch II (11) is turned to
position I. Operating switch II (11) lights up.
7. The control lamp of the iron (5) shows it is being heated up. As soon as the
control lamp goes off the operating temperature has been reached. Now you
can start ironing.
8. Always remove the mains plug after using the machine.
Steam Ironing
For this a high temperature is needed.
(The control lamp (13) also lights up brie y).
1. Turn the temperature control (1) to position „• • •“ (cotton, linen).
2. Move both operating switches (10/11) to position I. During operation the control
lamp (12) shows whether there is enough steam available for steam operation.
Off = steam being produced
Warning: The steam is hot! There is a danger of scalding!
3. You can set the desired quantity of steam with the steam regulator (9).
4. With the steam jet button (2) you can produce a short strong jet of steam.
Continuous steam is produced by locking the catch (3) in place.
Filling in Water during Operation
1. The control lamp (13) lights up when the water tank is empty.
2. The water tank can be replenished with water. First turn operating switch I (10)
to 0. Operating switch II (11) remains switched to I.
Note: If there is still some residual pressure in the water tank, a safety lock
prevents the water tank catch (7) from being opened. The residual pressure
rst has to be relieved before the device can be safely opened.
3. With the steam jet button you can now release the residual steam pressure.
When no further steam comes out of the iron sole plate, turn operating switch
II (11) to 0. Then please remove the mains plug and carefully open the water
tank lock (7).
Warning: The steam is hot! There is a danger of scalding!
4. With the help of a funnel fi ll freshwater from a measuring beaker into the water
tank. Do not overfi ll! Take care of water splashes that might come out of the
boiler. In order to prevent the water from splashing it should be fi lled into the
funnel slowly after the safety lock has been opened.
5. Fasten the safety lock again.
6. Insert the power plug back into the socket.
05-DBS 3000 NEW 47 06.04.2006, 8:03:20 Uhr
On = enough steam available,
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic dbs 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic dbs 3000 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info