Manual Clatronic db 2988 (page 25 of 38) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

323242

Zoom out

Zoom in

1/38

ENGLISH

Ironing without steam (steam jet regulator on )

1. Place the iron on its stand.

2. Turn the steam regulator (4) to .

3. Always set the temperature control to „0“ before connecting

the appliance to a power point, or before disconnecting it.

4. Sort out the garments according to their ironing tempera-

tures. Start with the lower temperatures. It is set with the

thermostat (1):

• Synthetics, silk low temperature

• • Wool medium temperature

• • • Cotton, linen high temperature

5. Electrical connection:

• Make sure that the iron voltage (see name plate) and

the line voltage match.

• Only connect the machine to a properly installed safety

socket, 230 V/50 Hz.

6. The control lamp (2) lights up. As soon as it shuts off, the

set temperature is reached. Now you can start to iron.

7. Always pull the plug out of the socket after using the iron.

Steam Ironing

For this a high temperature is needed (cotton, linen).

The quantity of steam can be regulated using the steam quantity

regulator (4).

no steam

Small steam volume

Large steam volume

Steam Jet

• Turn the button (5) to the steam jet symbol.

• Then press the button (5) for the steam jet.

Vertical Steam

This can be used to produce a jet of steam in a vertical direction.

ޥ NOTE:

To avoid excess water leaking from the soleplate do not

operate the steam burst for more than 5 seconds without

interruption.

WARNING: the steam is hot. Danger of scalding!

When ironing at low temperatures, make sure that you reduce

the quantity of steam or iron without steam. If the temperature is

too low water may leak from the soleplate.

Reﬁ lling the water tank

• Always disconnect the mains plug before reﬁ lling water.

• Set the steam control (4) to “

” (no steam). Open the lid

of the reﬁ ll inlet (6) and carefully pour in the water. Do not

exceed the maximum line as marked on the water reservoir.

Spray Function

• Turn the button (5) to the spray symbol.

• In order to moisten a section to be ironed press the spray

button (5).

Cleaning and Storage

• The device must never be immersed in water!

• Always remove the mains lead before cleaning!

• Clean the casing with a slightly damp cloth.

• Clean the iron with a slightly humid cloth.

• Always return the steam regulator to the „ “ position

after use and empty the water tank in order to prevent any

leaks.

Technical Data

Model: .............................................................................. DB 2988

Power supply: ............................................................230 V, 50 Hz

Power consumption: ..........................................................1600 W

Protection class: ........................................................................... Ι

Net weight: ........................................................................0,92 kg

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equipment

in the domestic waste.

Please return any electrical equipment that you will no longer

use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the

environment and human health.

This will contribute to the recycling and other forms of reutilisa-

tion of electrical and electronic equipment.

Information concerning where the equipment can be disposed of

can be obtained from your local authority.

05-DB 2988 Neu.indd 2505-DB 2988 Neu.indd 25 20.11.2008 12:53:06 Uhr20.11.2008 12:53:06 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic db 2988 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic db 2988 Manual

Product: