Manual Clatronic ctv 652 st vt (page 26 of 26) (English, German)

150203

Zoom out

Zoom in

1/26

11. The set parameters must be memorised. Select line STORE with

keys

∧∧

∧

∨∨

∨

and press RC key < or >. A red bar will appear what

means a successful memorisation.

12. To return to table VOLUME, press RC key OK.

Headphones.

13. The TV set (if appropriate to a certain model) has a possibility

of an independent volume control. Select line HEADPHONES with RC

keys

∧∧

∧

∨∨

∨

. Press RC key < or >. Table SOUND/HEADPHONES will

appear on the TV screen.

14. Select the parameter to be adjusted: volume, balance, high or

low frequency strengthening, language with RC keys

∧∧

∧

∨∨

∨

, a two

language volume signal is broadcast, while set a desirable volume

with RC key

< or >.

15. The set parameters must be memorised. Select line STORE with

keys

∧∧

∧

∨∨

∨

and press RC key < or >. A red bar will appear what means

a successful memorisation.

16. To exit from MENU table press RC key OK three times.

Note: The red button of the remote control is used to get directly into

the VOLUME menu.

Remote control button

Selection of five defined settings: “PERSONAL” (to be set in

VOLUME menu), “STANDARD”, “LANGUAGE”, “MUSIC” and

“MOVIE”.

Remote control button I/II in TV mode- button to select DUALI/DUALII for two-channel

transmissions.

In teletext - button to select the teletext languages.

SOUND

VOLUME 20

BALANCE 00

SOUND AV STEREO

EFFECT OFF

AVL STANDARD

LANGUAGE LANGUAGE1

STORE

EQUALIZER

HEADPHONES

SOUND / EQUALIZER

MODE PERSONAL

EQUALIZER 00

100 Hz +31

330 Hz +23

1000 Hz +15

3300 Hz +25

6600 Hz +31

STORE

SOUND/HEADPHONES

VOLUME 31

BALANCE 00

BASS +15

TREBLE +20

SOUND LANGUAGE LANGUAGE1

STORE

PICTURE

MODE PERSONAL

BRIGHTNESS 20

CONTRAST 40

SATURATION 32

SHARPNESS 20

HUE 00

TINT NORMAL

NOISE REDUCION OFF

STORE

Regulation of picture parameters

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear on the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

select the line PICTURE.

3. Push RC button

< or >. The table PICTURE will appear on the

screen.

4. Using RC buttons

∧∧

∧

∨∨

∨

select the line with desired picture

parameter for regulation: BRIGHTNESS, CONTRAST, SATURATION

or SHARPNESS.

5. Using RC button

< or > set desired value for adjustable parameter.

6. Using RC buttons

∧∧

∧

∨∨

∨

select the line TINT. Using RC button < or

> you can select desired colour of picture: NORMAL (neutral, grey),

WARM (pink), COLD (bluish).

7. Using RC buttons

∧∧

∧

∨∨

∨

select the line NOISE REDUCION. Using RC

button

< or > you can select desired level of noise reducion: OFF,

WEAK, MIDDLE, STRONG.

8. You can select one of four fixed modes of picture parameters.

Using RC buttons

∧∧

∧

∨∨

∨

select the line MODE. Using RC button < or

> you can select desired modes of picture parameters: PERSONAL,

(it suits the fixed meanings in the table PICTURE), STANDARD,

DYNAMIC (enlarged contrast), SOFT (reduced contrast).

Quick adjust of sound and picture parameters

BRIGHTNESS 15

VOLUME 15

CONTRAST 15

SATURATION 15

SHARPNESS 15

Regulation of sound parameters

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

1. Push RC button OK or MENU which is on the front of TV panel. You will

see the regulation’s bar VOLUME on the screen. Using the RC button OK

or TV button MENU, you can select the picture parameters: BRIGHTNESS,

CONTRAST, SATURATION and SHARPNESS.

2. Push RC button

< or >, or buttons P+, P- which are in the front of TV panel,

set the parameter which you want.

Notes:

1. It is possible to regulate the sound just pushing RC button

< or >, when

there is no selected any sound or picture parameter.

2. The regulation bars of parameters turn of approximately in 3 seconds after

the last action.

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear on the screen.

2. Push RC button

< or >. The table SOUND will appear on the screen.

3. Push RC button

< or > and set the sound’s level which you want.

4. Select parameter BALANCE with RC keys

∧∧

∧,

∨∨

∨ . By pressing RC

keys

< or > set a desirable volume balance between volume

channels.

5. Select parameter AVL (automatic volume level) with RC keys

∧∧

∧,

∨∨

∨ . If pressing RC keys < or > you select version OPERATE,

during translation a fixed volume level will be maintained automatically. If you select version

STANDARD – AVL this function will be disabled.

6. Select parameter EFFECT with RC keys

∧∧

∧,

∨∨

∨ . If pressing RC keys < or >you select version

WIDE, the volume will be reproduced with a dimensional effect. If you select version OFF

this function will be disabled.

7. Select parameter SOUND AV with RC keys

∧∧

∧,

∨∨

∨ . By pressing RC keys < or > you may select

what volume signal -MONO or STEREO - you will receive from exterior signal sources via AV inputs.

8. If the receiving channel is broadcast with two language volume, select parameter LANGUAGE

with RC keys

∧∧

∧,

∨∨

∨ , while by pressing RC key < or > select a desirable language LANGUAGE1 or

LANGUAGE2.

9. The set parameters must be memorised. Select line MEMORY with keys

∧∧

∧ ,

∨∨

∨ and press RC key

< or >. A red bar will appear what means a successful memorisation.

Equaliser.

10. To set a desirable characteristic of the volume channel you may use an equaliser function. Select

line EQUALISER with RC keys

∧∧

∧,

∨∨

∨ . Press RC key < or >. Table SOUND/EQUALISER will appear

on the TV screen. Select one of five available modes: PERSONAL (values are set in the table of

frequencies hereunder by selecting certain frequency with RC keys

∧∧

∧,

∨∨

∨ , while a desirable value

is set with RC keys

< or >), STANDARD, VOICE, MUSIC and FILM.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ctv 652 st vt in the language / languages: English, German as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic ctv 652 st vt Manual

Product: