Manual Clatronic ctv 652 st vt (page 23 of 26) (English, German)

150203

Zoom out

Zoom in

1/26

2330

Automatic update of programmes

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

AUTOSEARCH

AUTOMATIC INSTALLATION

AUTOMATIC UPDATE

AUTOSEARCH

AUTOMATIC INSTALLATION

AUTOMATIC UPDATE

215,25 MHz

CHANNELS FOUND 2

25%

If you want to add new programs to already written programs, you

can use the function of automatic renewal.

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear on the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

select the line AUTOSEARCH and push RC

button

< or >. The table AUTOSEARCH will appear on the screen.

3. Select the line AUTOMATIC UPDATE by using RC buttons

∧∧

∧

∨∨

∨

and then push RC button < or >. All broadcasted TV programs will

be tuned up automatically and will be written into the memory. It takes

few minutes. When the writing will be finished, the first written

program and table EDIT will appear on the screen. This function is

used to customizing the programmes. How to use this table, read in

the head “Customizing your stored programmes”.

4. If you want to leave the MENU tables, push the RC button OK twice.

5. You can switch the programmes using the RC buttons

∧∧

∧

∨∨

∨

, 0, 1,

…, 9 or P+, P- on the front panel of TV.

Manual tune up of programmes

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear in the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

select the line MANUAL SEARCH and push

RC button

< or >. The table MANUAL SEARCH will appear on the

screen.

3. Using RC buttons

<, >, 0, 1, ..., 9 select the number of programme,

into which you want to write tuned programme. If selected number

of programme is red, it shows, that the programme is written in the

selected position and will be deleted when you will write the new

programme.

4. Using RC buttons

∧∧

∧

∨∨

∨

select the line BAND and push RC button

< or > to select desirable band of channels: VHF-L, VHF-H or UHF.

5. Using RC buttons

<, >, 0, 1, ..., 9 to select the line SEARCH. If you

want to start the search, push the RC button

< or > (it depends on

the direction of search). When the programme is founded, the farther

tuning stops. If you want to find and tune up other programme, it is

necessary to push RC button

< or >. It should be repeated until the

desirable programme will be found.

MANUAL SEARCH

PROGRAMM 06

BAND UHF

SEARCH 479,25 MHz

STORE

(VHF-L/L1, VHF-H/L (optional)).

CLOCK

CURRENT TIME 09:51

TIME FROM PROG. 04

TURN OFF TIME −−:−−

TURN ON TIME −−:−−

PROGRAM − −

SLEEP TIMER OFF

AV modes

8. Using RC buttons

∧∧

∧

∨∨

∨

select the line PROGRAM. Using RC

buttons 0, 1, …, 9 in the line PROGRAM set the number of

programme in which the TV has to switch automatically.

9. Using RC buttons

∧∧

∧

∨∨

∨

select the line SLEEP TIMER. Using RC

buttons

< or >, you can set the time after which the television will turn

into the standby mode. The time interval is between 15 and 90 minutes.

If you want to turn off the timer, select the variant OFF.

10. If you want to leave the MENU tables, push the RC button OK twice.

Notes:

1. When you turn off your television using the power button, you have to enter the time meanings anew,

if there is no automatic scan of real time from the teletext.

2. If you turned off your television using the power button, you have to enter the fixed time of switching

off/switching on anew.

Push RC button AV one or few times to select the desired modes of external signal sources:

AV1 – selects picture and sound inputs in the SCART1 socket. It is used to

connect VCR, satellite receiver or other equipment.

AV2 – selects picture and sound inputs in the SCART2 socket. It is used to

connect the video, satellite receiver or other equipment.

S-VIDEO - selects the inputs of sound, picture’s sharpness and colour signals in the

SCART2 socket. It is used to connect the video, satellite receiver or other

equipment.

FRONT AV- Is used to select the picture and tone input at the FRONT AV connections.

Is used for the connection of video recorder, satellite receiver or another

appliance.

Using teletext

1. Turn on the programme, which broadcasts the information of

teletext.

2. Push RC button TXT and turn on the teletext mode.

3. Using RC buttons 0, 1, …, 9 select the desired page (3 numbers).

Your television will start to search the selected page of teletext.

After a while, you will see your selected page with teletext

information on the screen.

4. If some symbols are reproduced incorrectly in the teletext page,

it can be that wrong group of teletext languages is selected. Push

the RC button I/II and select the best-suited group: R/W, R/E, E/W, E/E, GRE.

5. If you want to come back to TV mode, push RC button TV or TXT.

Notes:

1. If there are no teletext in your chosen programme, you will see the note NO TELETEXT when you

switch the TV to the teletext mode.

2. The control of teletext information using other buttons is written in the chapter “Remote control”.

100 100 TV3 01/05 09:48:07

TELETEXT INFORMATION

RGB - selects the inputs of red, green and blue color signals in the SCART1

socket. It is used to connect up the games or other signals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ctv 652 st vt in the language / languages: English, German as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic ctv 652 st vt Manual

Product: