549706
34
Zoom out
Zoom in
Previous page
1/62
Next page
34
NOTE
You may also cancel the timer function at any time by press-
ing the POWER
button to turn the unit on/off.
Emptying the water tank (see gure on page 4)
The unit integrates a water tank for collecting condensation.
When this tank is full, the unit will emit several beeps. The unit will
automatically switch into STANDBY mode. The
icon will be
ashing on the display.
You must empty the water tank in order to continue operation. To
do so, use a oor towel, a at bowl that can collect approx. 1 liter
of water, as well as the water hose and adapter (22) provided.
1. Disconnect the mains plug from the wall socket.
2. Place the oor towel and the at bowl underneath the water
outlet.
3. Remove the bushing from the outlet.
4. Connect the adapter to the nut and water hose.
5. Remove the rubber plug and keep it for later use.
6. Connect the water hose to the water outlet of the unit.
7. If possible, put the bowl on a lower level than the unit. Place
the end of the water hose in the bowl.
8. Remove the water hose after all the water has been drained.
Close the water outlet of the unit, reattaching the rubber
plug and the nut in order to facilitate the condensation
cooling circuit.
Terminating operation
1. Press the POWER
button to turn off the unit.
2. Disconnect the mains plug from the wall socket.
Cleaning
WARNING:
Always disconnect the mains plug from the wall socket before cleaning!
Make sure no water enters the openings of the unit during cleaning.
Never immerse the appliance in water! Otherwise this might result in an electric shock or re.
CAUTION:
Do not spray the device with cleaning agents.
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Filter
When using the unit daily, clean the lter every 2 weeks. If dust in
the lters blocks the air circulation, efcient operation of the unit
can no longer be guaranteed.
1. First, remove the lters located on the back of the unit side-
ways. Then remove the lters located on the side of the unit.
2. Vacuum the lters for cleaning.
3. Clean the lters under running water. If necessary, use a mild
detergent.
4. Let the lters air-dry in a shady place.
5. Reinstall the lters when completely dry.
CAUTION:
Do not operate the unit without the lter!
Housing
Use a vacuum cleaner to vacuum the ns and ventilation
openings.
Wipe the housing with a slightly damp cloth.
Seasonal cleaning and storage
When not using the unit for a long period of time, proceed as fol-
lows:
1. Empty the water tank as described above.
2. Operate the unit in “Fan”
mode for 2 hours in order to dry
the inside of the unit.
3. Press the POWER
button to turn off the unit. Disconnect
the mains plug from the wall socket.
4. Clean the lters and the unit as described above.
5. Disconnect the exible exhaust pipe from the unit.
6. Cover the unit with foil.
7. Always store the appliance out of the reach of children in a dry,
well ventilated place.
Troubleshooting
Problem Possible cause Solution
Unit does not
function
No power supply. Check the power con-
nection.
Timer function is activa-
ted.
Press the POWER
button to turn on the
unit.
The
icon is ashing
in the display.
Empty the water tank.
You may then restart
the unit again.
Unit does not
cool sufciently
The unit is exposed to
direct sunshine.
Choose another lo-
cation or shade the
windows.
Windows or doors are
open.
Close any windows or
doors.
There are too many
people or other heating
sources in the room.
Remove portable hea-
ters or switch them off.
The lters are dirty. Clean the lters.
The air inlet or air outlet
is blocked.
Remove the blockage.
Keep the ventilation
openings free from
obstructions.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic CL 3542 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic CL 3542 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info