Manual Clatronic BS 1302 (page 32 of 58) (English, German, Dutch, French, Italian, Polish, Spanish)

653908

Zoom out

Zoom in

1/58

BS1302_IM 08.03.16

• Never use without the lter. Check that the lter is inserted correctly!

• Hair, clothing and body parts away from the vacuum nozzle during

use!

• Keep the vacuum cleaner away from sources of heat like radiators,

ovens, etc.!

Overview of the Components

1 Air slide

2 Handle

3 Suction hose

4 Cover lock (dust container)

5 On / off switch

6 Carrying handle

7 Dust collector release button

8 Cable-winding button

9 Suction power control

10 Ventilation grill lock (outlet lter)

11 Positioning aid

12 Dust container

13 Dust collector base plate

14 Hose connection

15 Connection head of the vacuum hose

16 Carpet / hard oor selector

17 Floor nozzle (with hook (not shown))

18 Telescopic suction tube

19 Parquet brush

20 Combined brush / crevice nozzle

Start-up

• Insert the connecting head of the suction hose into the

hose connection of the appliance. It must lock mechan-

ically.

• To disconnect the hose again, press the button on the

connecting head.

• Insert the vacuum tube into the handle if required.

• You can use the sliding switch on the telescopic suction

tube to adjust the length individually. (Page 4, Fig. A)

• Then assemble the oor nozzle and / or the accessories.

Nozzle Attachment

Floor nozzle (17)

You can clean smooth surfaces and carpets with the oor

nozzle.

Set the selector (16) according to condition of the oor:

For durable hard oors like laminate, tiles, PVC,

etc.

For carpet oors, rugs, etc. with high or low pile

Parquet brush (19)

For gentle cleaning of sensitive hard oors like parquet,

laminate, tiles, etc.

Combined brush / crevice nozzle (20)

For vacuuming upholstery, curtains and in corners and

crevices etc.

NOTE: “2-in-1” nozzle:

When this is folded together it can be used as a groove

nozzle. If you would like to use the brush nozzle, pull the

brush section in the direction of the arrow until it locks in

place.

To detach the nozzle attachments from the suction pipe, pull

them off by turning them slightly.

Using the Appliance

1. Unwind the length of cable you require.

CAUTION:

• Pull out the cable up to the maximum length indicat-

ed with the yellow mark.

• Never pull the cable out up to the red mark as the

cable winding can be damaged.

NOTE:

If the red mark is visible, pull in the cable with the help

of the cable winding button back to the yellow mark.

2. Insert the mains plug into a correctly installed power

socket.

3. Turn the device on by the on / off switch by pressing down

the button.

4. Set the “carpet / hard oor” selector, depending on the

oor covering.

5. Set the suction power with the suction power controller.

6. Vacuum at a steady speed. There is no need to exert

pressure.

NOTE:

Pay attention to the range that can be covered with the

cable length!

Air Slide (1)

Open the air slide on the hose handle in order to regulate the

airow or to clear any particles sticking to the nozzle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic BS 1302 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic BS 1302 Manual

Product: