592078
31
Zoom out
Zoom in
Previous page
1/62
Next page
31
Do not suck up liquids!
Do not suck up hot ashes or pointed or sharp objects!
Do not use the device in damp rooms!
Never use without the lter. Check that the lter is inserted correctly!
Hair, clothing and body parts away from the vacuum nozzle during
use!
Keep the vacuum cleaner away from sources of heat like radiators,
ovens, etc.!
Overview of the Components
1 Air slide
2 Telescopic suction pipe
3 Holder for accessories and hook for stowage clip on the
bottom of the device
4 Slide for telescopic suction pipe
5 Floor nozzle (with hook (not shown))
6 Lever for extending and retracting the brushes
7 Power cord with plug
8 Cable-winding button
9 Stowage clip
10 On/Off button and suction power control
11 Cover for extraction lter
12 Dust bag lling display
13 Connection head of the vacuum hose
14 Hose connection
15 Opener dust bag compartment
16 Suction hose
Rear side of the device (not shown):
Storage compartment with dual accessory (combined crevice
and brush nozzle)
Start-up
Insert the connection head of the suction hose into the
hose connector until it locks in place. To do so, please
press the buttons simultaneously. In order to release the
hose again, please press the buttons once more on the
connection head.
Keep the buttons pressed down and then pull out the hose.
Insert the vacuum tube into the handle if required.
Then assemble the oor nozzle and/or the accessories.
Nozzle Attachment
Floor nozzle (5)
The oor nozzle features castors for easier movement.
You can clean smooth surfaces and carpets with the oor
nozzle.
Adjust the brushes outwards or inwards using the lever (6).
Best use of the appliance depends on the texture of the oor
covering. We recommend the following use:
Use without brushes:
For vacuuming oor coverings with a deep pile
Use with brushes:
For vacuuming smooth oors and carpets with a shallow
pile
Crevice and jointed nozzle
For vacuuming upholstery, curtains and in corners and crevices
etc.
The stowage compartment with the crevice nozzle and brush
nozzle can be found on the back of the appliance next to the
mains cord.
NOTE: “2-in-1” nozzle:
When this is folded together it can be used as a groove
nozzle. If you would like to use the brush nozzle, pull the
brush section in the direction of the arrow until it locks in
place.
To detach the nozzle attachments from the suction pipe, pull
them off by turning them slightly.
Telescopic suction pipe
The length of the telescopic suction pipe can be adjusted
individually:
1. Loosen the locking mechanism by sliding
and holding the button (4) in the direction
of the arrow marking.
2. Extract one tube from the other to the
desired length.
3. Release the button in order to lock the
connection.
Mains cable
Pull the mains cable from the cable compartment.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic BS 1295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic BS 1295 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info