Manual Clatronic bs 1260 (page 39 of 66) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

319584

Zoom out

Zoom in

1/66

ENGLISH

Instructions for Use

Intended Use

• The device is intended for use as a wet/dry vacuum cleaner

in accordance with its description and safety instructions.

• The device also has an additional connection with blower

function.

• Any other type of use is considered to be in contradiction of

the intended use and is not permitted.

Attaching the Castors

Before you can use the device you ﬁ rst have to attach the

castors.

• Place the collection vessel

(5) on its head.

• Attach the castors by tighte-

ning the screws by hand and

then with the spanner.

Inserting Dust Bags (only for Dry Vacuuming)

The device has a permanent dust bag. This is easy to empty

and can be cleaned.

• Lock the permanent dust bag

with the clip.

• Push the dust bag into the

holder (a).

Motor Protection Filter (15)

The motor protection ﬁ lter is located on the bottom of the motor

housing.

• This is required for both wet and dry vacuuming.

• You should check the condition of the ﬁ lter and that it is

ﬁ rmly in place at regular intervals.

Connecting the Hose

ޥ NOTE:

Do not attach the hose until you have inserted the dust bag

ﬁ rst.

• Attach the end of the hose

(connection) to the collection

vessel. The locking lugs on

the connecting piece grip

inside the vessel.

• Turn the connecting

piece slightly in a clockwise

direction. The catch lever (b)

points upwards.

• Releasing the hose: Push the catch lever and turn it in an

anticlockwise direction in order to release the hose from the

collection vessel.

Attaching the Motor Housing

ޥ NOTE:

• Between the motor housing and the collection vessel there

is a black rubber seal.

• Please ensure that this seal is always inserted and

correctly ﬁ tted in place. If this is not the case the suction

power is lost.

ޥ NOTE:

The motor housing can only be attached in one position. The

arrow above the hose connection must point to the arrow

below the on/off switch.

• Line the motor housing up in

such a way that its holder is

located above the clips (6) of

the collection vessel.

• Then close the clips.

Nozzle Attachment

Crevice nozzle: For vacuuming upholstery, curtains and

in corners and crevices etc.

Floor nozzle

(only for dry

cleaning):

To clean carpets or smooth surfaces.

Smooth

ﬂ oors

Press the lever down with your foot. The

brush is now visible.

Carpets

: Press the lever In the opposite direction.

The brushes are now retracted.

Parquet brush:

(also for wet

cleaning)

The ﬂ oor nozzle is ﬁ tted with rollers for

improved manoeuvrability. For large

areas such as parquet, laminate or tiles

etc. This brush is also ideally suited to

soaking up water from large surfaces.

Releasing the

nozzles

Pull these off while turning slightly.

Accessories

• The accessories such as the suction tube, hose and nozzles

can be easily joined together.

• Releasing: Pull them off again by turning slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the

airﬂ ow or to clear any particles sticking to the nozzle.

05-BS 1260 39 19.09.2006, 12:54:56 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bs 1260 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic bs 1260 Manual

Product: