Manual Clatronic bs 1256 (page 40 of 62) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

316203

Zoom out

Zoom in

1/62

ENGLISH

Ill. 1

Emptying the Dust Container

• Turn the device off and

remove the mains plug from

the socket. Pull the handle

of the vacuum cleaner and

remove the dust container.

• Press the button on the side

of the container to empty its

contents.

• Then close the ﬂ ap of the

dust container again.

• Reinsert the dust container,

ensuring that it clearly clicks

into place.

Ill. 2

Ill. 3

1. Motor Protective Filter (in the

Dust Container)

Cleaning the Filter Element

Important:

Always empty the dust con-

tainer ﬁ rst before removing

the ﬁ lter element.

• Remove the dust container

(see illustration 1).

• Remove the contents of

the dust container. In order

to do this, press the button

on the dust container (see

illustration 2).

• Turn the lid (see illustration 3)

in the direction „ “ and then

lift it off, including the ﬁ lter

element.

Ill. 4

• Turn the ﬁ lter element in the

„OPEN“ direction to remove

it from the lid. Remove the

ﬁ lter element (two parts)

and clean the main ﬁ lter by

tapping out the contents and

gently brushing.

• Now replace the compon-

ents. Please then turn the

ﬁ lter element in the CLOSE

direction until it is tight.

• Place the lid on the dust

container - the

arrow is

located above the „ “ symbol

- and then turn it in the „ “

direction until it is tight.

• Every third time the dust con-

tainer is emptied, or in the

case of severe soiling, clean

the ﬁ lter by allowing water to

ﬂ ow through the ﬁ lter fabric

against the direction in which

the vacuum cleaner blows.

The dust container should

only be reinserted when it is

completely dry!

• Now place this back in position once it has completely dried!

Caution: Never wash the ﬁ lter in the washing machine,

and please do not use a hairdryer to dry it.

Ill. 5

2. Inlet ﬁ lter

• The inlet ﬁ lter is located

below the dust container

compartment. Remove the

dust container and then the

inlet ﬁ lter. Clean the inlet ﬁ lter

approximately every tenth

time the dust container is

emptied, or more frequently if

necessary.

• Please ensure that the ﬁ lter is always clean, as otherwise

air circulation cannot be guaranteed. If necessary, the ﬁ lter

can also be washed in warm water without any additives.

Place it back into place only once it is completely dry!

Ill. 6

3. Outlet ﬁ lter

• The appliance is also equip-

ped with an outlet ﬁ lter.

• In order to ensure that the

ﬁ lter works correctly, we

recommend that you replace

it every six months.

• It is located on the rear part

of your appliance behind a

ventilation grid.

• Open the ventilation grille by

pressing the lever on its side.

• Then pull the grille out towards the front. Remove the ﬁ lter

and clean as described above. Fit the ﬁ lter back into place

and close the ventilation grid by following the steps above in

the opposite order.

Important note!

• Cleaning may become necessary after a shorter time,

depending on the conditions of use, e.g. when vacuuming

ﬁ ne dust.

• If the suction power of your vacuum cleaner diminishes

please clean the ﬁ lters as described.

• If the suction power suddenly diminishes during operation

this may be due to the ﬁ lters being locked.

05-BS 1256 40 04.05.2007, 11:48:32 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bs 1256 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 16,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic bs 1256 Manual

Product: