319580
25
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
ENGLISH
ENGLISH
25
Nozzle Attachment
Crevice and
jointed nozzle: For vacuuming upholstery, curtains and in
corners and crevices etc.
„2-in-1“ nozzle: When this is folded together
it can be used as a groove nozzle. If you
would like to use the brush nozzle, pull the
brush section in the direction of the arrow
until it locks in place.
Floor nozzle: To clean carpets or smooth surfaces.
Smooth oors: Press down the lever with
the brush symbol with your
foot. The brush is now
visible.
Carpets: Press the lever In the oppo-
site direction. The brushes
are now retracted.
Releasing
the nozzles: Pull these off while turning slightly.
Air Slide
Open the air slide on the hose handle in order to regulate the
airfl ow or to clear any particles sticking to the nozzle.
Dust bag replacement display (6)
Hold the hose up into air. If the dust bag change display lights
up, the bag is full. Please change it.
Changing the dust bag
Pull the plug out of the socket.
Open the lid of the dust bag compartment by the handle (7).
Remove the bag by pulling the retainer carefully upwards so
that you have easier access to the bag. Then remove the
dust bag by pulling it upwards.
Insert a new bag. Please ensure that the bag is located
correctly in the guide mechanism. Then reinsert the retainer.
Close the cover so that it snaps into place.
Filter
Your appliance has two fi lters.
Motor protection fi lter (inlet fi lter):
The inlet fi lter is located in the dust bag compartment. The fi lter
is located vertically in the rear section of the dust housing. Re-
move the fi lter by pulling upwards. Clean the engine protection
lter after 10 dust bag changes. If necessary, the fi lter can also
be washed in warm water without any additives. Place it back
into place only once it is completely dry!
Outlet fi lter:
The appliance is also equipped with an outlet fi lter. This fi lter is
to be found under the fi lter cover (8). Open the ventilation grille
by pressing together the lever on the side of the ventilation grille.
Then pull the grille out towards the front. Remove the fi lter and
clean as described above. Please re-insert the fi lter correctly
and close the ventilation grille (until it clicks in place).
Cleaning and storage
Cleaning
Pull the plug out of the socket before cleaning!
Clean the casing with a dry cloth.
Storage
Let the iron cool down completely.
Wind the cable completely.
If you place the vacuum cleaner in a horizontal position:
Please hang the hook on the suction tube in the parking aid
(14) on the rear of the vacuum.
If you place the vacuum cleaner in a vertical position: Please
hang the hook of the fl oor nozzle in the parking aid on the
underside of the vacuum.
Technical Data
Model:...............................................................................BS 1250
Power supply:............................................................230 V, 50 Hz
Power consumption:
P
nom.
:............................................................................ 1200 W
P
max.
:............................................................................ 1600 W
Protection class:.......................................................................... ΙΙ
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
05-BS 1250 25 30.06.2006, 12:29:25 Uhr
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic bs 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bs 1250 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info