327917
20
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
ENGLISH
20
Preliminary Operations
Please see illustration.
First remove the heating element (1).
Remove any packaging material that may be present.
Clean the grilling grid (5) and the grilling trough (4) with a
damp cloth.
Assemble the grill as shown in illustration.
ޥ NOTE:
The control unit is fi tted with a safety switch. This prevents
the heating element being operated outside the grill tray.
Insert the control unit carefully. If the heating cannot be
switched on, please check the mains connection and that
the control unit is correctly positioned in the grilling trough.
Pour 1.8 litres of cold water into the grill tray up to the „MAX“
Mark.
CAUTION:
Always fi ll the grilling trough with water. The water bath
and the metal sheet prevent excessive heat radiation in
the area of the standing surface of the grill.
Before using for the fi rst time, fi ll the grill tray with water and use
it for 15 minutes to remove the protective fi lm from the heating
coil. The presence of smoke is normal. Make sure that a suf-
cient level of ventilation is available. Preheat the device before
use for approximately 5 minutes.
Usage
Insert the plug in a duly installed 230 V/50 Hz protective
contact socket.
Fill in 1.8 l of cold water up to the „MAX“ mark in the trough.
Turn the device on by the switch and wait for approximately
5 minutes until it has heated up.
Lay the food directly on the grill grid. Never use plates, trays
or aluminum foil beneath the food. The time taken to grill the
food depends on its thickness. Thick foods are grilled more
quickly by piercing it with metal skewers. Turn the food from
time to time.
The height of the grill grid can be varied. Please see illustra-
tions 1 and 2.
Should the water level drop below the MIN mark after
continuous use, pull the plug from the socket and fi ll with
water until the MAX mark is reached. Do not pour any cold
water over the hot heating element. Otherwise this may be
damaged.
Switching-off
Turn the device off by the switch and remove the mains plug.
Troubleshooting
The control unit is fi tted with a safety switch. This prevents
the heating element being operated outside the grill tray.
Should it not be possible to switch on the heating, please
check the mains connection and that the control unit is cor-
rectly positioned in the grilling trough.
Cleaning
Always pull the plug from the mains socket before cleaning
and wait until the unit has cooled down.
Clean the unit with a slightly dampened cloth. Never dip the
heating element into water!
The grilling grid and trough can be cleaned in soapy water.
Never use a steel brush or other scratching objects.
Assemble all the parts as shown in the diagram.
Technical Data
Model: .............................................................................. BQ 2977
Power supply: ............................................................230 V, 50 Hz
Power consumption: ..........................................................2000 W
Protection class: ........................................................................... Ι
Net weight: ........................................................................2,38 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
05-BQ 2977 Neu.indd 2005-BQ 2977 Neu.indd 20 19.11.2008 9:32:48 Uhr19.11.2008 9:32:48 Uhr
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic bq 2977 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic bq 2977 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info