167959
39
Zoom out
Zoom in
Previous page
1/50
Next page
ENGLISH
ENGLISH
39
ޥ NOTE:
If registration was not successful, „ “ appears in the
display of the car radio.
Depending on the mobile telephone manufacturer, it
is necessary to carry out the registration (PAIRING)
again in order to register your mobile telephone in the
car radio.
Bluetooth compatibility cannot be guaranteed for
mobile telephones that come onto the market in the
future.
In order to guarantee an optimum connection, please
ensure that the battery of your mobile telephone is
fully charged.
Some makes of mobile telephone have an energy-sa-
ving mode. Please deactivate the energy-saving mode,
as you may otherwise have problems when telephoning
via Bluetooth.
In order to be able to conduct an incoming or outgoing
telephone call Bluetooth has to remain activated in
your mobile telephone. Please consult the operating
instructions for your mobile telephone.
Please ensure that you speak in the direction of the
built-in microphone. The connection of an external
microphone is not possible.
Outgoing Calls
1. Keep the PAIR/
button (20/24) held down to call up
the Bluetooth menu.
2. In order to enter the desired telephone number please use
either the touch screen or the number buttons on the remote
control.
ޥ NOTE:
If you have entered one or more fi gures incorrectly you
can delete them by repeatedly holding down the „
button or the „
̇
“ cursor button on the remote control.
3. To call up the desired number, press the „
“ button in the
touch screen menu. The words „DIALING OUT“ appear in
the display together with the telephone number.
4. To terminate the call please press the BAND/ button
(1).
ޥ NOTE:
In order to call the telephone number you have entered
you can also press the PAIR/ button (20).
In order to end a call you can also press the „
button on the touch screen or the REDIAL/ button
(25) on the remote control.
Redialling
The device stores the last number you have dialled. In order to
dial this number again you can either keep the BAND/
button (1) on the device pressed down or the REDIAL/
button (25) on the remote control.
ޥ NOTE:
If you would like to redial the last number you can also press
the „ “ button on the touch screen.
To end the call press either the „
“ button on the touch
screen, the REDIAL/ button (25) on the remote control or the
BAND/ button (1) on the device.
Incoming Calls
In the case of incoming calls a ringing tone is heard from
the loudspeakers, and if the caller has a CLIP „Calling Line
Identifi cation Presentation“-capable telephone, the caller’s
number appears in the display of the car radio. Otherwise „CALL
INCOMING“ appears in the display.
1. To accept an incoming call, press the PAIR/
button
(20) to confi rm. You will now hear the caller through the
loudspeakers of your car.
2. To terminate the call please press the BAND/
button
(1).
ޥ NOTE:
You can transfer the call back to your mobile tele-
phone. In order to do so, keep the PAIR/ button
(20) pressed. If this button is held down again, the call
is transferred back to the car radio.
In order to reject an incoming call press the BAND/
button (1).
About the DVD-Player
With this DVD-Player you can play a vast variety of DVD-formats
Technical data“.
However, you must be aware that in many cases DVDs are
encrypted with a so-called “Regional Code”. This specifi es for
which region in the world the DVD is intended. As an example,
the DVDs marked with regional code “1” are intended for the USA
and Canada. DVDs with regional code “2” are for use in Europe.
ޥ NOTE:
With your DVD-Player you can only play DVDs with regional
code “2”. There are both lots of burning and compressing
methods as well as high quality differences in (burned) CDs/
DVDs. Moreover, the music industry has not yet agreed on a
xed standard for copy protection. This may, in very isolated
cases, result in problems when relaying CDs, DVDs and MP3
CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs
or DVDs which were created on a PC (e.g. holiday photo-
graphs). In case of problems check the settings of the DVD
writing program on your computer. You should in particular make
sure that the DVD has been fi nalized. For further information on
this matter please refer to the operating manual of your recorder.
Input Not Possible
If a function or input selected by you is not
possible, the adjacent symbol is shown on the
screen.
05-AR 773 DVD_GB.indd Abs1:3905-AR 773 DVD_GB.indd Abs1:39 19.10.2007 14:14:47 Uhr19.10.2007 14:14:47 Uhr
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic ar 773 dvd tft at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ar 773 dvd tft in the language / languages: English, German as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info