63042
76
Zoom out
Zoom in
Previous page
1/120
Next page
76
Time Form
"12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format between "12
Hours” & “24 Hours"
AV Jack
The panel AV Jack is default as “AV In” source. User can use the Encoder Vol Knob to select “OUT”. Once
“OUT” is selected, the panel AV jack is changed as an AV OUTPUT ( AV OUT ) of the Audio / Video Signal of
this unit's Built-in DVD player.
This AV Out selection is useful for user by simply plug and connect to any external TFT system without
any extra installation.
Camera
“OFF” is set as default. If user connected a back up camera system to this unit, user should choose Camera
“ON” mode. Once “ON” is selected, & the vehicle is in Reverse Gear ( Backup mode ), the front in-dash TFT
display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently dis-
played on the front in-dash TFT.
If connected to a back up camera system but this option is selected to “OFF” mode, User still can press
the mode button to switch “AV In 1” to display the Back Up Camera Video on the front in-dash TFT.
Tuner Set
User can use the Encoder Vol Knob to select between Local or Distance mode. This feature is used to desig-
nate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default
setting, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local sta-
tions during automatic tuning, rotate the Encoder Vol Knob button until "Local" appears on the display.
Tuner Area
User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this
unit is used in, U.S.A. South America, Europe or Oirt. (Russia Band)
Beep Tone
The beep tone feature allows the selection of an audible beep tone when a button is pressed. "BEEP TONE
On" is the default setting. Rotate the Encoder Vol Knob to select the "BEEP TONE Off" option
Programmable Turn-on Volume (VOL PGM)
This option allows the adjustment of the volume level of the radio will automatically assume when turning on.
"VOL PGM 12" is the default setting. To program a specific turn on volume level, use the Encoder Vol Knob to
select "VOLUME LEVEL” within 5 seconds.
Rear Speaker On/Off (Rear Spk)
Rear speaker is set to 'ON' by default. If OFF is selected, the rear speaker's audio output will be TURNED
OFF. This function is useful while listening with the HEADPHONE and user doesn't need Rear Speakers
sounds output through rear speakers. Select “ON” to reactivate the rear speakers sound output
When the Rear Speaker is 'OFF', the Audio Function, 'FADER', will not be functional
Inter Amplifier On/Off (Inter Amp)
This is a option selection for user to turn the unit's built-in Amplifier system on or off. “OFF” is the default set-
ting. This option is useful for user if connected to an external Amplifier & the user do not want audio output of
the built-in amplifier system.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic AR 760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic AR 760 in the language / languages: English, German as an attachment in your email.

The manual is 10,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info