551760
24
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
ENGLISH
24
Important Information
for installing your carradio!
1. The screws (h) of the transport locking device should
be removed before installation, as otherwise the CD
cannot be inserted.
2. The device is designed for the minus pole of the battery,
which must be connected to the body of the vehicle. Please
check this before installation.
3. When installing/connecting your device please note that not
every vehicle is equipped with an “ISO connection“. In this
case we recommend the use of an ISO adapter specifi cally
designed for your vehicle.
Adapters are available from car accessory shops and/or
from your vehicle workshop.
4. Depending on the specifi c car type, different wiring connec-
tion of the „Duration +” wire (Constant current connection)
are available. (However, this is necessary for storing the
radio stations).
In order to guarantee all functions, installation in line with
these instructions is essential. In cases of doubt please
contact an authorised car workshop.
5. The angle of inclination when a car radio is installed must
not exceed 20°, as in the case of greater angles of inclina-
tion the function of the car radio (CD/DVD Player) can no
longer be guaranteed.
6. Depending on the specifi c car type, interferences can
be possibly arise during radio/CD/DVD operation. These
interferences can avoided easily with an additional Inter-
ferences fi lter. Your car radio is originally prepared with an
Interference Filter already.
In these case, please contact your authorized car dealer.
7. When installing your radio please ensure that there is
enough space at the rear and at the fan of the radio to ensure
sufficient cooling.
8. For the antenna connection there are two different norms.
The fi rst of these is the old (50 ohm) version with a long pro-
truding round contact on the vehicle and a round socket on
the radio end. The second is the ISO-standardised antenna
plug (150 ohm). Adapters for both formats are available from
accessory manufacturers and/or your car workshop.
Important information for VW/Audi vehicles: The active
antenna requires voltage on the shielding of the antenna
coaxial cable, without which reception is unsatisfactory. An
antenna adapter with phantom power supply will solve this
problem.
Operating Instructions
1. Any errors (ERROR) occurring during operation can be
corrected by pressing the RESET button. Use a piece of
wire or similar item to press the RESET button (28) in order
to return the electronics to its original state.
2. If the interior of the vehicle becomes very hot, for example
after standing in direct sunlight for a prolonged period, do
not switch on the player until the inside of the vehicle has
cooled down a little after you have been driving for a few
minutes.
3. Playback of CDs/DVDs produced by the user cannot be
guaranteed due to the large variety of software and CD/DVD
media available.
4. Some keys are to be found both on the device itself and on
the remote control. Keys with the same designation have the
same function.
Operation (Illustration 2: Control Panel)
1. PWR On/Off Button
Press this button to switch the device on. WELCOME
appears in the display. Keep this button pressed to switch
the device off. SEE YOU appears in the display.
2. VOL Multifunction Button (Volume)
In the standard playback mode the multifunction button is
used for adjusting the volume. If the SEL button is pressed
beforehand, changes can be made in the menus, e.g. sound
mode.
3. SEL Button (Select)
a) Press the SEL button briefl y to access the sound/picture
mode selection menu. The word „BASS“ appears in the
display for adjusting the bass levels. By repeatedly pres-
sing the SEL button you can now select the individual
menu items such as BASS, TREBLE, BALANCE and
FADE, BG COLOR, COLOR*, BRIGHT *, CONTRAST *,
TINT *, VOLUME. The settings of the individual menu
items are changed by turning the multifunction button
VOL (2). (* only in DVD mode.)
b) Press the SEL button for a longer time to access the
selection menu:
REG ON / REG OFF
PI MUTE / PI SOUND
AF OFF / AF ON
Repeatedly pressing of the SEL button now brings up
the individual menu items. The settings of the individual
menu items are changed by turning the multifunction
button VOL.
REG Function
At certain times some stations divide up their programmes
into regional programmes with varying content.
REG ON: The message „REG ON“ appears in the display
for a few seconds.
ޥ NOTE:
The display capacity is limited. It is possible that in the
double display mode some segments of the display
are deleted.
The function REG ON prevents the radio from swit-
ching to alternative frequencies which have a different
regional programme content.
05-AR 737 DVD_GB 24 21.08.2006, 11:49:58 Uhr
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic AR 737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic AR 737 in the language / languages: English, German as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info