497713
7
Zoom out
Zoom in
Previous page
1/22
Next page
7
Nr. Item Function
1 LED Power
Indicates the power status.
Yellow: device out ,power adapter connected
Orange: device on , power adapter connected
Red: device on , power adapter not connected
2 LED Lock This light will be on when signal is locked.
3-11 LED 13V / 18V / 22kHz Indicate the 22K/13V/18V
4 Key [F1] [F2] [F3] [F4] Made of 4 keys, F1 -- F4
5 Key [System] To set all system parameters.
6 Key [Scan] Go to auto scan menu and scan channels
7 Key [Angle]
Go to the AZ , EL and Polarity calculation
menu
8 Charge port To connect with the charger cord.
9 IF signal input Satellite signal input port,
10 Display
Screen shows MENU and Programs clearly
11-3 LED 13V / 18V / 22kHz Indicate the 22K/13V/18V
12 Key [Power]
To turn the meter on/off press and hold for 2
seconds to power on the meter.
13 Key Navigations and [OK]
Use the Arrow key to select the right item, OK
key to confirm.
14 Key [Menu] To enter the main menu
15 Key [Exit]
To exit from the present menu and move to the
previous
menu
16 Key [Find]
Go to the easy satellite find menu, can set and
align a
satellite dish quickly.
17 USB Port Connect USB storage device to upgrade
8
1
Start of operation
Battery
Before the first operation with the measuring device charge the battery
completely.
Load the accumulator during the first loading procedure at least 5hours.
The maximum battery charging time is approximately 12 hours.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarke-tech SFP2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarke-tech SFP2010 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarke-tech SFP2010

Clarke-tech SFP2010 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info