37
English
36
37
6.7 System Information
You can check the current information about your receiver such as receiver model name, S/W
(software) version, H/W (hardware) version, manufacturing date, etc. <Figure 6.7.1>
ҫ
Note : This information is useful to download new software and/or repair the
receiver.
<Figure 6.7.1>
6.8 Common Interface
To enjoy scrambled channels, you will need a Common Interface Conditional Access Module
(CAM) and a Smart Card from the service provider (program distributor). If you are subscribing
to services from more than one service provider, you will need a Smart Card from each one, and
may even need different CAMs (depending on the DVB Common Interface standard each uses).
Since a Smart Card is connected to a single service provider, a limited range of channels will be
available via it.
ҫ
Note : Without the CAM and the smart card, you can watch only Free-to-Air
programs.
͈
Insert a CAM into a receiver’s slot designed for it, and a Smart Card into the CAM.
͉
The message ‘CAM Initializing’ will appear on the screen. <Figure 6.8.1>
͊
After the message ‘CAM Initializing’ has disappeared, you can select the channel that you
want to watch.
1) CAM Initializing
6.6 USB Menu
4) PVR Management
- Disk Information : Choose the hard disk drive. You can view the information of selected
drive. (file system, total size, used size, free size) <Figure 6.6.5>
- Format Disk : You can format the USB device. <Figure 6.6.6>
ҫ
Note : The receiver supports FAT16 and FAT32(Recommended) of USB device, but
NTFS file system doesn`t support. If USB device is formatted by NTFS, Please
change file system to FAT32(Recommended) by PC.
- Default Recording Drive : You can change the default drive for recording. Default is C:\.
- Testing USB Speed : You can test your USB device for supporting PVR.
- Timeshift Recording Size : Choose the default time-shift size for trick mode.
<Figure 6.6.5>
<Figure 6.6.6>
