571987
7
Zoom out
Zoom in
Previous page
1/25
Next page
13
Nederlands
12
6.1 Hoe te beginnen 6.1 Hoe te beginnen
Selecteer het item welke u wilt editten, en stel de gewenste waardes in (Schotel Instelling)
- Satelliet
: Selecteer een satelliet
- LNB Power
: Selecteer 1 van de volgende opties AAN/UIT
- LNB TYPE : Selecteer een van de volgende Universeel / OCS / Enkel
- LNB Freq. : Stel de frequentie van de LNB oscillator in
- 22 KHz : Wanneer deze niet op AUTO staat, stel het
-
DiSEqC
: DiSEqC protocol in Uit/1.0/1.1 voor uw configuratie
-
Committed/Uncomitted
: Stel de DiSEqC poort in
Motor Instelling
- Frequentie
: Als de standaard TP frequentie niet is aangewezen, dan kunt u een andere
TP frequentie kiezen om het signaal te controleren
- DiSeqC
: Stel het DiSEqC protocol 1.2/USALS in voor uw motor
Wanneer de DiSEqC Motor parameter is ingesteld op 1.2 :
- Draai : Verplaats de schotel positie naar west/ oost
- Motor Controle : Controleer de motor
- Verwijder Limiet : Verwijder de oost en west limiet
- Goto Referentie
: Draait de satellietschotel naar de 0 positie
- Stel Oost/West Limiet in : Edit & opslaan van de oost/west limiet
Selecteer de Limiet via de (OK) knop
Wanneer de instelling op USALS staat :
- Sat Graden
: Laat de huidige graden van de geselecteerde satelliet zien
- Positie Instelling : Selecteer de positie.
- Goto Referentie : Draai de satelleitschotel naar de 0 positie
- Longitude : Edit longitude (numerieke knoppen)
- Latitude
: Edit latitude (numerieke knoppen)
Indien u klaar bent druk dan op de (EXIT) knop.
Druk de (Menu) knop om het hoofdmenu scherm te laten zien
Gebruik de (UP/DOWN) knop om door het menu te bladeren.
Druk (OK) bij' Schotel Instelling. Een venster zal tevoorschijn komen. <Figuur 6.1.2>
of druk (OK) knop bij Motor instelliing. Een venster zal tevoorschijn komen. <Figuur 6.1.3>
Notie : Een 4-cijferig paswoord kan tevoorschijn komen. Het standaard paswoord is '0000'.
2) Schotel Instelling.
< Figuur 6.1.2 >
< Figuur 6.1.3 >
signaal van LNB/Switch in voor controle van 0/22
www.dvbelectronics.nl
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarke-tech 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarke-tech 2500 in the language / languages: Dutch as an attachment in your email.

The manual is 17,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info