63180
13
Zoom out
Zoom in
Previous page
1/41
Next page
280-8262-00
WXZ468RMP 13
English
Basic Operations
Adjusting the G.EQ EDIT
This function allows you to correct each fre-
quency band by 9 band equalizer.
This adjustment can only be performed when
the DZE is set to “DZE OFF”.
1. Press the [A-MODE] knob and select “G.EQ
EDIT”.
2. Turn the [SEARCH] knob to select the fre-
quency. (Adjustment range: 63Hz to 16kHz)
3. Turn the [A-MODE] knob to adjust the gain.
The factory default setting is “0”. (Adjustment
range: -6 to +6)
4. Repeat steps 2 and 3 to adjust the gain and
the frequency.
Adjusting the bass (Gain, Frequency)
This adjustment can only be performed when
the DZE is set to “DZE OFF”.
1. Press the [A-MODE] knob and select
BASS”.
2. Turn the [A-MODE] knob to adjust the bass.
The factory default setting is “0”. (Adjustment
range: –6 to +7)
3. Turn the [SEARCH] knob to select “BASS
FREQ”.
Turn the [A-MODE] knob to select the fre-
quency.
The factory default setting is “60”. (Adjustment
60/80/120 Hz)
4. When the adjustment is complete, press the
[A-MODE] knob several times until the
function mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can only be performed when
the DZE is set to “DZE OFF”.
1. Press the [A-MODE] knob and select
TREBLE”.
2. Turn the [A-MODE] knob to adjust the treble.
The factory default setting is “0”. (Adjustment
range: –6 to +6)
3. Turn the [SEARCH] knob to select
TREBLE FREQ”.
Turn the [A-MODE] knob to select the fre-
quency.
The factory default setting is “12k”. (Adjust-
ment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-MODE] knob several times until the func-
tion mode is reached.
Adjusting the balance
1. Press the [A-MODE] knob and select “BAL-
ANCE”.
2. Turn the [A-MODE] knob to adjust the bal-
ance of the left and right speakers.
The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-MODE] knob several times until the
function mode is reached.
Adjusting the fader
1. Press the [A-MODE] knob and select
FADER”.
2. Turn the [A-MODE] knob to adjust the bal-
ance of the front and rear speakers.
The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-MODE] knob several times until the
function mode is reached.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion WXZ468RMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion WXZ468RMP in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion WXZ468RMP

Clarion WXZ468RMP User Manual - German - 44 pages

Clarion WXZ468RMP User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info