162954
22
Zoom out
Zoom in
Previous page
1/82
Next page
Opening the Liquid Crystal Panel and Adjusting the Angle
20
VZ709
English
Owner’s manual
Note:
If the liquid crystal panel stops in the middle of its
operation, press the [OPEN] button to house the
panel and press the button again to raise it. The
unit will enter the same display mode as the
display was in when last turned off.
Panel calibration function
The liquid crystal panel’s maximum angle of
inclination can be adjusted to match the
installation configuration within the vehicle.
Perform this with the panel in its housed
position.
1. Keep pressing the [OPEN] button more than 5
seconds.
The electronic beep will be heard.
After the beep sounds twice, the panel will
come out and stand up to the maximum angle.
After completion of the calibration, the panel
will be housed into the unit automatically.
If the panel does not strike the instrument
panel or other parts of the car during
calibration, the maximum inclination will be
110°.
If the panel strikes a car part during
calibration within a range of 70° inclination,
the maximum downward inclination will be
70°.
Adjusting the angle of the liquid
crystal panel
The angle of the liquid crystal panel can be
adjusted depending on the mounting angle of the
unit or light coming into the car.
1. Turn the power on. When the liquid crystal
panel is closed, press the [OPEN] button.
2. Press the [MENU] button to display the
following Menu screen:
3. Repeat touching the [Tilt] key to adjust the
angle of the liquid crystal panel. Every
touching the [Tilt] key tilts the liquid crystal
panel forward or backward.
The adjusted angle is stored in memory.
Adjustment is possible within the range 70°
to 110°.
There are 5 adjustable angles available.
Housing the liquid crystal panel
1. Press the [OPEN] button.
The liquid crystal panel is housed
automatically.
Note:
When leaving this unit unused for a long period of
time or leaving your car, be sure to house the liquid
crystal panel.
Turning the liquid crystal panel
horizontal (Air conditioner operation
mode)
When the way the liquid crystal panel is mounted
hinders the operation of the air conditioner, the
position of the panel can be turned horizontal
temporarily.
1. Keep pressing the [OPEN] button more than 2
seconds when the liquid crystal panel is open.
A beep sounds and the liquid crystal panel
turns horizontal.
•Press the [OPEN] button again for the panel
to return to the original position.
The unit can be set so that the panel returns
to the original position after a set time in the
horizontal position (see page 61).
70˚
70˚
MAX 110°
280QC6832BA-VZ709_EN.book Page 20 Monday, January 5, 2009 5:48 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion vzn709 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion vzn709 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info