580462
82
Zoom out
Zoom in
Previous page
1/85
Next page
80
VX709E
English
INSTALLATION
MANUAL
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
Connecting the parking brake cord to lamp ground allows you to watch video images when the parking brake
is engaged.
When the parking brake cord is not connected, the monitor will not display video images.
If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking
brake while confirming safety, and then engage the parking brake again.
Connecting the Accessories
Connection to the Rear Vision Camera for vehicle
The Rear Vision Camera for vehicle can be connected to Rear Vision Camera terminal on the main
unit. For detailed information, refer to the instruction sheet or manual for the Rear Vision Camera.
Note:
Be sure to connect the reverse gear cord to the vehicle’s relevant terminal.
Connect the Rear Vision Camera to the RCA pin cord; if not, the screen turns black while the gearshift lever
is in the reverse gear position.
The power supply box CAA185 (sold separately) is required for connection of the main unit and the Rear
Vision Camera.
Navigation System
When using the NP509E:
Connect the CeNET Convert Box (CCB509) and the main unit via the CeNET and the RGB cables,
and then connect the CeNET Convert Box (CCB509) and the NP509E via the System cable.
When using the NAX983HD/NAX973HD/NAX963HD:
Connect the CeNET connector and the RGB terminal.
For detailed information, refer to the instruction manual of the Navigation System.
Parking brake lamp
+ cord to battery
Electro-tap
Parking brake
signal cord
Parking brake cord
(Grass-green)
How to attach the electro-tap
1. Place the Parking brake cord at the stopper,
and fold it back in the direction of the arrow.
2. Pass the Parking brake signal cord through,
and fold it back in the direction of the arrow.
Parking brake
Parking brake
signal cord
Parking brake
signal cord
Stopper
Parking brake cord
(Grass-green)
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion VX709E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion VX709E in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion VX709E

Clarion VX709E User Manual - German - 92 pages

Clarion VX709E User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info