497688
19
Zoom out
Zoom in
Previous page
1/140
Next page
Basic Operations
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
Audio adjustment menu.
Turning on/off the LOUDNESS
The Loudness setting emphasizes the low and
high sound level areas to provide a more full and
dynamic sound without distortion.
1. Touch the [ -] or [+] key of the SW VOL item
to adjust to desirable level.
Setting range:
–7 to 7 (The factory default setting is “0”.)
1. Enter the Audio settings menu.
2. Touch [ON] or [OFF] of the [LOUDNESS]
item to turn on or off the loudness effect.
(The factory default setting is “OFF”).
Adjusting the non fader output
phase
You can adjust the subwoofer phase from the
SETTING adjustment menu.
1. Touch the ASP tab in the SETTING menu.
Setting range:
0 or 180 (The factory default setting is “0”)
2. Touch the [SUB PHASE] button in the ASP
menu and a selection menu will appear.
Adjusting the non fader output
Low Pass Crossover
You can adjust the subwoofer phase from the
SETTING adjustment menu.
1. Touch the ASP tab in the SETTING menu.
Setting range:
80,120 or 160Hz (The default setting is “60”)
2. Touch the [SUB FILTER] button in the ASP
menu and a selection menu will appear.
Adjusting the MONITOR
1. Press the [PIC ] button on the remote control
or [MONI/ADJ] button on the VX409.
2. Perform the adjustment for the desired item.
See the following sections for detail.
3. Touch the [Back] key to return to the previous
screen.
*In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the brightness, contrast
and color levels
1. Touch the [PIC] key on the remote control
or [MONI/ADJ] key on the VX409.
2. Touch the [-] or [+] key to make adjustments
to the settings to your desired levels.
“Bright”:
Adjusts the brightness of the display.
“Color”:
Adjusts the color saturation.
“Contrast”:
Adjusts the level of black.
or green is emphasized).
Bright/Color/Contrast:
The factory default setting is medium level.
Adjusting the SETTING
1. Press the [MENU] button, then touch the
[SETTING] key.
2. Touch the top navigation tabs to switch
between the SETTING menus. You can
navigate between General, Screen, ASP,
Regional, and Rating.
3. Perform the adjustment for the desired item.
See the following sections for detail.
4. Touch the [Back] key to return to the previous
screen.
*In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
19
VX409/VZ409
English
Owner’s manual
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion VX409 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion VX409 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 39,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info