497692
59
Zoom out
Zoom in
Previous page
1/79
Next page
Digital Radio/DAB Operations
63
VRX878RVD
English
Owner’s manual
Storing a programme to preset
memory
1. Press the [BAND] button or touch the [Band]
key to select the desired band (M1, M2 or
M3).
2. Receive the programme you wish to store by
performing the seek tuning, etc.
3. Touch the [List] key.
4. Touch and hold the desired preset key for
more than 2 seconds to store the current
programme.
Information standby mode
When the Information programme selected in the
INFO SELECT screen of the DAB Option menu
starts, the unit switches to the selected
Information programme automatically.
For details on Information Select, refer to the
section “Information select” below.
1. Keep pressing the [TA] button more than 1
second.
INFO” is displayed on the screen, and this
unit enters to the Information standby mode
until information starts.
If you press the [TA] button while the
Information programme is being received,
receiving programme is cancelled, and the
unit enters to the Information standby
mode.
2. To cancel the Information standby mode,
keep pressing the [TA] button again more
than 1 second.
Note:
Only when the DAB tuner is connected, this can be
operated even in the RDS mode.
Information select
This function allows you to specify a type of
Information for the Information interrupt mode.
You can set any of the following 6 types of
Information:
TRAVEL, WARNING, NEWS, WEATHER ,
EVENT, and SPECIAL.
1. Touch the [Option] key, and then touch the []]
key of the INFO SELECT item.
The INFO SELECT screen is displayed.
2. Touch the [ON] or [OFF] key of the desired
Information item.
3. Touch the [Back] key to return to the previous
screen.
PTY
This function enables you to listen to the selected
programme type, regardless of the function
mode.
DAB and RDS have the same PTY.
You can select one PTY from DAB or RDS.
PTY broadcast are not yet available in all
countries.
In the information standby mode, INFO stations
have priority over PTY stations.
In the TA standby mode, TP stations have
priority over PTY stations.
Dynamic Label Function
A dynamic label (hereinafter referred to as “DLS”)
is a text data associated with each DAB service.
This unit can display a DLS up to 128 characters
on the screen.
DLS display mode
Normally, 16 letters x 1 line are displayed on the
DAB mode screen.
1. Touch the []] key on the DAB mode screen to
display all DLS text.
2. To cancel the DLS mode and return to the
previous screen, touch the [Back] key.
If there is a DLS data in the reception service,
the DLS text is displayed in the text displaying
area.
DLS memory
Up to 6 DLSs, currently being received, can be
stored.
1. Touch the []] key on the DAB mode screen.
2. Touch and hold the desired preset [1] to [6]
key more than 2 seconds.
The DLS data currently being displayed is
stored.
DLS calling
1. To call the DLS stored in the DLS memory,
touch the desired preset [1] to [6] key.
The DLS data in the DLS memory is displayed
up to 128 characters.
2. To cancel the DLS mode and return to the
previous display, touch the [Back] key.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion VRX878RVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion VRX878RVD in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion VRX878RVD

Clarion VRX878RVD User Manual - Dutch - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info