166083

Clarion vrx 633r multimedia Manual

36
Zoom out
Zoom in
Previous page
1/42
Next page
40 VRX633R
English
Owner’s manual
Connecting other
company’s image equipment
center of the JOYSTICK § to set connection
of the CCD.
RGB type or composite type images from other
company’s equipment can be displayed on this
unit
Be sure to perform this setting after connecting
the RGB type or composite type image equip-
ment to the RGB terminal.
1. When the panel is open, press the ADJ but-
ton £ to show the adjustment selection dis-
play.
2. Operate the JOYSTICK § upward or down-
ward to select “INPUT”. A menu bar is shown
to the right to select the following items:
● “NAVI”: Setting when Clarion NAVI is con-
nected;
● “CCD”: Setting when Clarion CCD camera
is connected to this unit;
● “RGB”: Setting when a RGB image of other
company’s equipment is input;
● “COM”: Setting when a composite image
of other company’s equipment is input.
3. Operate the JOYSTICK § rightward or left-
ward to select “RGB” or “COM”.
● To connect an RGB equipment:
If the image equipment to connect is RGB
type, select “RGB”. Equipment capable to be
connected should have positive polarity sig-
nal of 0.7 V p-p for RGB, and negative polar-
ity signal of 0.3 V p-p for synchronous signal.
●
To connect a composite type equipment:
If the image equipment to connect is a “Com-
posite” type, select “COM”.
∗ These settings cannot be selected when the
DVD changer is connected.
4. Then, press the ENT at the center of the JOY-
STICK § to set the connection.
Display changeover
When the panel is open, it is possible to change
over between AV display and external equipment
display using the NVG/AV button !.
∗ In the external equipment display, those buttons
in the panel (JOYSTICK §, MENU ∞, VIEW
¢, IN £, OUT ™) are disabled.
Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CCA-188).
Notes:
• This function is not available when the display is
stored.
• When the TV tuner and CCD camera are to be
connected to this unit, connect the CCD camera
to the CCD input terminal on this unit.
• Refer to the subsection “Sample System 3” in
“9. SAMPLE SYSTEMS” section.
Setting CCD as an external input
equipment
Be sure to perform this setting after connecting
the CCD.
1. When the panel is open, press the ADJ but-
ton £ to show the adjustment selection dis-
play.
2. Operate the JOYSTICK § upward or down-
ward to select “INPUT”. A menu bar is shown
to the right to select the following items:
● “NAVI”: Setting when Clarion NAVI is con-
nected;
● “CCD”: Setting when Clarion CCD camera
is connected to this unit;
● “RGB”: Setting when a RGB image of other
company’s equipment is input;
● “COM”: Setting when a composite image
of other company’s equipment is input.
3. Operate the JOYSTICK § rightward or left-
ward to select “CCD”. Press the ENT at the
CCD Camera
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion vrx 633r multimedia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion vrx 633r multimedia in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info