166083
19
Zoom out
Zoom in
Previous page
1/42
Next page
VRX633R 23
English
Owner’s manual
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a to-
tal of 2 changers (MD and/or CD).
Press the FNC button 1 and select the CD
changer mode to start play. If 2 CD changers are
connected, press the FNC button 1 to select the
CD changer for play.
If “NO MAG appears in the display, insert the
magazine into the CD changer. LOADING ap-
pears in the display while the player loads (checks)
the magazine.
If “NO DISC appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press the PLAY/PAUSE button 3 to pause
play. PAUSE appears in the display.
2. To resume play, press the PLAY/PAUSE but-
ton 3 again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Each time you press and hold the DISP button
@ for 1 second or longer, the title display changes
in the following order.
When the panel is closed:
User title (disc) CD-text title (disc) CD-text
title (track) User title (disc)...
When the panel is open:
User title (disc) CD-text title (disc & track)
User title (disc)...
Note:
If the CD playing is not a CD-text CD or no user
title has been input, ---------- appears in the dis-
play.
Scrolling a CD-text title
When a CD-text title is longer than 16 charac-
ters (8 characters when the panel is closed), you
can scroll the display as follows.
Switching the PTY display language
Note:
This function is enabled only when the panel is
open.
You can select one of 4 languages (English, Ger-
man, Swedish or French) for the PTY displayed
in the display.
The factory default setting is GB (English).
1. Press the ADJ button £ to show the adjust-
ment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select "PTY LANG". After that, select
a desired language by operating the JOY-
STICK § rightward or leftward and then press
the ENT at the center of the JOYSTICK § to
change the setting.
GB: English
F: French
D: German
S: Swedish
3. Press the ADJ button £. The unit returns to
the previous mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
The factory default setting is 15.
During a TA, ALARM or PTY interrupt, operate
the VOLUME button 2 upward or downward
to set the volume to the desired level (00 to 33).
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
RDS Operations
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion vrx 633r multimedia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion vrx 633r multimedia in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info