162957
48
Zoom out
Zoom in
Previous page
1/69
Next page
46
NX509
English
Owner’s manual
Adjusting the Bass
Adjusting the Mid
Adjusting the Treble
Adjusting the Balance/Fader
Setting the Sub Woofer
Control
You can adjust the volume output to the Sub
Woofer.
The factory default setting is “0”.
Setting the Sub Woofer Phase
You can reverse the phase of the Sub Woofer
output signal.
The factory default setting is “Normal”.
Adjusting the High Pass Filter
You can adjust the cut-off frequency of the High
Pass Filter for the front/rear speaker output.
The factory default setting is “Through”.
3-4. Touch the [Bass] key.
3-5. Touch the [] or [+] key of the desired item
to adjust the effect level.
Gain: –7 to +7
The factory default setting is “0”.
Frequency: 50Hz, 100Hz, 200Hz
The factory default setting is “100Hz”.
Q: 0.7, 1, 1.4, 2
The factory default setting is “1”.
3-4. Touch the [Mid] key.
3-5. Touch the [] or [+] key of the desired item
to adjust the effect level.
Gain: –7 to +7
The factory default setting is “0”.
Frequency: 500Hz, 1kHz, 2kHz
The factory default setting is “1kHz”.
Q: 0.7, 1, 1.4, 2
The factory default setting is “1”.
3-4. Touch the [Treble] key.
3-5. Touch the [] or [+] key of the desired item
to adjust the effect level.
Gain: –7 to +7
The factory default setting is “0”.
Frequency: 5kHz, 10kHz, 15kHz
The factory default setting is “10kHz”.
Q: 0.7, 1, 1.4, 2
The factory default setting is “1”.
3-1. Touch the [BAL/FAD] key to display the
BAL/FAD tab screen.
3-2. Touch the [[] or []] key of the Balance item
to adjust the balance level.
[[]:
Emphasizes the sound from the left
speakers.
[]]:
Emphasizes the sound from the right
speakers.
Adjustment range: left 12 to right 12
The factory default setting is “0”.
3-3. Touch the [{] or [}] key of the Fader item
to adjust the fader level.
[{
]:
Emphasizes the sound from the front
speakers.
[}]:
Emphasizes the sound from the rear
speakers.
Adjustment range: front 12 to rear 12
The factory default setting is “0”.
3-1. Touch the [Others] key to display the Others
tab screen.
3-2. Touch the [] or [+] key of the Sub Woofer
Ctrl item to adjust the output level.
Setting range: –6 to +6
3-1. Touch the [Others] key to display the Others
tab screen.
3-2. Touch the [Reverse] or [Normal] key of the
Sub Woofer Phase item to select the phase
setting.
3-1. Touch the [Others] key to display the Others
tab screen.
3-2. Touch the [[] or []] key of the High Pass
Filter item to adjust the setting.
Settings: Through, 60Hz, 90Hz, 120Hz
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion nx509e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion nx509e in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion nx509e

Clarion nx509e User Manual - Dutch - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info