473613

Clarion NX501E Manual

119
Zoom out
Zoom in
Previous page
1/123
Next page
50 NX501E/NZ501E
English
Owner’s Manual
5
Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate
its (your) position and needs at least four signals to
give a three-dimensional position, including elevation.
Because the satellites are moving and because objects
can block the signals, your GPS device might not
receive four signals. If three satellites are available, the
receiver can calculate the horizontal GPS position but
the accuracy is lower and the GPS device does not
give you elevation data: only 2D reception is possible.
Active route
The currently navigated route. Whenever the destination
is set, the route is active until you delete it, reach your
destination or you quit Clarion Mobile Map. See also:
Route.
City Centre
The city/town centre is not the geometric centre of the
city/town but an arbitrary point the map creators have
chosen. In towns and villages, it is usually the most
important intersection; in larger cities, it is one of the
important intersections.
Colour theme
Clarion Mobile Map comes with different colour themes
for daytime or night use of the map and menu screens.
Themes are custom graphic settings and they can have
different colours for streets, blocks or surface waters
in 2D and 3D modes, and they display shades or
shadows in different ways in 3D mode.
One daytime scheme and one night scheme is always
selected for the map and for the menus. Clarion Mobile
Map uses them when it switches from day to night and
back.
GPS accuracy
Several factors have impact on the deviation between
your real position and the one given by the GPS
device. For example, signal delay in the ionosphere or
reflecting objects near the GPS device have a different
and varying impact on how accurately the GPS device
can calculate your position.
Map
Clarion Mobile Map works with digital maps which are
not simply the computerised versions of traditional
paper maps. Similarly to the paper road maps, the 2D
mode of digital maps show you streets, roads, and
elevation is also shown by colours.
In 3D mode, you can see the altitude differences, for
example valleys and mountains, elevated roads, and in
selected cities 3D landmarks and 3D buildings are also
displayed.
You can use digital maps interactively: you can zoom
in and out (increase or decrease the scale), you can tilt
them up and down, and rotate them left and right. In
GPS-supported navigation, digital maps facilitate route
planning.
Road Safety Camera
Special alert points for speed, red light or bus lane
cameras. Different data sources are available. You can
configure Clarion Mobile Map to warn you when you
approach one of these cameras.
Detecting the location of Road Safety Cameras
is prohibited in certain countries. It is the sole
responsibility of the driver to check whether this feature
can be used during the trip.
The software is capable of showing and warning
for more than just cameras. Various other types of
proximity alert points like school zones and railway
crossings are also available.
Route
A sequence of route events, i.e. manoeuvres (for
example, turns and roundabouts) to reach the
destination. The route contains one start point and one
or more destinations. The start point is the current (or
last known) position by default. If you need to see a
future route, the start point can be replaced with any
other given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always
points in the current driving direction. This is the default
orientation in 3D map view mode.
Vehimarker
The current position is shown with a red arrow on the
map by default. The direction of the red arrow shows
the current heading. This position marker can be
replaced with different vehicle symbols. You can even
specify different Vehimarkers for different route types
(depending on which vehicle type is selected for route
calculation).
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 50 2011-2-23 11:24:21
… 119 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion NX501E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion NX501E in the language / languages: English as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion NX501E

Clarion NX501E User Manual - German - 127 pages

Clarion NX501E User Manual - Dutch - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info