580418
44
Zoom out
Zoom in
Previous page
1/159
Next page
44 NX501/NZ501
English
Owner’s Manual
16. HD Radio™ RECEIVER OPERATIONS
This function is available when an HD Radio tuner is
connected.
This unit can control the following HD Radio tuner:
• HD Radio Tuner (THD400)
Note:
Be sure to turn off the ACC power before connecting/
disconnecting the HD Radio tuner.
• Not all areas offer HD Radio broadcasts.
HD Radio stations may not always broadcast sub
channels
Volume levels of HD Radio stations may vary. Increase
the volume gradually from the minimal setting after
the channel is selected. Be sure to lower the volume
setting before switching to another mode or channel.
Additional information about HD Radio Technology can
be found at www.hdradio.com
Listening to HD Radio broadcasts
Note: Connect THD400 HD RadioTM tuner to activate
HD RadioTM function.
1. Touch the [Tuner] button on the Main menu display.
The HD Radio mode screen will be displayed.
2. Press the [FM1/2/3/AM] button or touch the [Band]
key on remote control to select the radio band. Each
time the button is pressed, the radio reception band
changes in the following order: FM1, FM2, FM3, AM,
FM1...
1-Preset Scan Button
2-Direct Button
3-Preset List Button
4-Setting Button
5-Tune Up
6-Tune Down
7-Band Display
8-Bluetooth Status Display
9-System Time
Seek Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [
] key, and then flick the BIG
Frequency up and down to search for next available
station.
When ick the frequency up, the station is searched
in the direction of higher frequency.
When flick the frequency down, the station is
searched in the direction of lower frequency.
Step Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [
] or [ ] key in frequency panel to tune
up or down by one step.
Recalling a preset station
1. Press the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2. Touch the [
] key,
3. Press the preset station (1 to 6) on preset list.
4. Press the [
] key, then press the [ ] button to
auto search and store the stations.
Manual memory
1. Touch the desired Band key to select the band you
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Touch and hold the desired Preset key you want to
store for about 3 seconds.
1 32
8 9
4
6
5
7
LOC/DX Setting
The DX / LOC setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature
is useful in areas that have many radio stations in close
proximity.
1. Touch the [
] key to switch to LOCAL tuner
sensitivity.
2. Touch the [
] key to switch to DX tuner
sensitivity.
NX_NZ501北美版说明书.indd 44 2011-1-19 17:36:28
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion NX501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion NX501 in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info