497686
38
Zoom out
Zoom in
Previous page
1/59
Next page
Notes on the Voice Guidance
39
NAX980HD
English
A U-turn may be required at a waypoint.
The route calculation may not be completed in
the following cases:
If there is no main road within a range of
approx. 5 km (3 miles) from the current
location.
If there is no main road within a range of
approx. 5 km (3 miles) from the destination
(or waypoints).
If the vehicle is too close to the destination.
In this case, a message to inform you about
this will be displayed.
If it is impossible to reach the destination or
waypoints because of traffic regulations, etc.
If the map database does not contain the
area data of the selected locations.
If only an extremely roundabout route is
available to reach the destination or
waypoints.
When displaying a route, the following may
occur:
Even if a route calculation is requested on a
main road, the start point of the suggested
route may not exactly match the current
vehicle location.
If a route calculation is requested on a main
road, the end point of the suggested route
may not exactly match the destination.
If a route calculation is requested on a main
road, the system may suggest a route
starting from another main road.
In this case, park the vehicle in a safe
location and reset the vehicle mark using
Setting menu, or continue driving until the
vehicle icon appears on a main road. If
either of these methods are not successful,
request a route calculation again.
Ferry lines are stored in this system. Take
into consideration the travel time required
and operational condition before deciding
whether to use them or not.
The current location or the traveling direction
may shift according to the traveling condition. It
is not a malfunction, and will return to a normal
display when keeping traveling for a while.
Though the vehicle position may shift in places
other than the road such as in the parking lot,
etc., it is not a malfunction. It will return to a
normal display when traveling on an actual
road for a while.
In the current location display, a representative
name of the place which is nearest to the
vehicle position in the map database is
displayed, it may be different from the actual
place name.
Notes on the Voice Guidance
The voice guidance may not match the actual
roads or regulations. The cause of this can be
that the actual roads and the data in the map
database are different, or the vehicle speed.
This navigation system will not issue neither
voice guidance nor turn by turn arrow for the
roads of which the traffic regulations and
geometries of the roads have not been verified
by the Map D/B supplier, because the system
cannot generate the route guidance for these
roads. Be sure to follow the actual traffic
circumstances and regulations.
If the content of the voice guidance does not
match the actual roads or regulations, follow
the information acquired from the actual traffic
or road signs.
The voice guidance is activated only for
intersections with certain conditions. There
may be cases that the vehicle has to turn, but
the voice guidance is not activated.
The content of the voice guidance may vary,
depending on the direction of the turn and the
type of the intersection.
The voice guidance timing will vary depending
on the situation.
The voice guidance is not available when the
voice guidance function is not set to ON.
Moreover, even when the voice guidance
function is set to ON, if the voice guidance
volume is set to a very low value, the voice
guidance may not be audible. Volume/
Voice Settings” (P. 47)
The voice guidance will start when the vehicle
enters the suggested route. Before entering the
route, refer to the map screen for directions.
When the vehicle approaches a waypoint, the
voice guidance will say “You have arrived at
waypoint <1 to 5>”. The voice guidance will
switch to the next route section. Please refer to
the map screen for directions until the next
voice guidance is started.
When the vehicle approaches a destination,
the voice guidance will say “You have arrived
at the destination”. For the remainder of the
way, please refer to the map screen for
directions.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion NAX980HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion NAX980HD in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info