580438
160
Zoom out
Zoom in
Previous page
1/187
Next page
General Settings
64
MAX973HD
English
Owner’s manual
Time Zone”:
Sets the time zone. You can select from the
list of 74 regions including the [Auto] key.
When you select the [Auto] key, the clock is
automatically switched to the time zone of the
country at the vehicle position.
Changing Skin
You can change the screen design by using the
skin data stored in the hard disk drive.
1. Touch the [Select] key of the “Skin Change
item.
2. Touch the desired item key you wish to set.
Note:
This operation is disabled while recording a CD or
loading/ejecting a disc.
Beep Sound
You can turn ON/OFF the beep sounds and
menu operation sounds.
Keyboard Type
You can change the keyboard layout used for
name entry.
1. Touch the item key of the “Keyboard” item.
2. Select the keyboard type by touching one of
the following keys:
[ABCDEF] key
[QWERTY] key
[QWERTZ] key
[AZERTY] key
Voice Recognition
You can turn ON/OFF the voice recognition
feature (optional). When you touch the [OFF]
key, the voice recognition is not available.
Voice Feedback
You can turn ON/OFF the voice feedbacks which
are responded when using voice commands.
Blinking LED
When this function is set to “ON”, the Blinking
LED indicator will blink when the power is turned
off.
Antenna
Select the [Antenna] when an antenna, which is
extended automatically, is used. Otherwise,
select the [Others].
Security Mode
To set this function ON, setting a PIN code
(called as “Personal Code”) is required. When
you set your Personal Code, a theft is prevented
by disabling the operation of the unit.
In addition, set the Blinking LED function to “ON
to improve the effect of this function.
Setting the Security Mode
1. Touch the [ON] key of the Security Mode item.
The Set Code screen appears.
2. Enter your desired 4-digit Personal Code by
using Ten-Key pad displayed on the screen,
then touch the [OK] key.
Touch the [ ] key when you make a
mistake in entering.
3. Enter the same Personal Code again for
confirmation, then touch the [OK] key.
The entered Personal Code will be set, and it
will return to the previous screen.
Resetting the Security Mode
1. Touch the [OFF] key of the Security Mode
item.
The Erase Code screen appears.
2. Enter your 4-digit Personal Code by using
Ten-Key pad, then touch the [OK] key.
The message “Code erased” appears, and it
will return to the previous screen.
Personal Code entry
The Personal Code screen will be displayed
when turning the power on after performing the
following operations:
The car battery was replaced.
The backup power was cut off.
The Reset button was pressed.
Note:
If you forgot your Personal Code, please consult
your dealer or an authorized service centre.
1. Enter your Personal Code currently set.
When the correct Personal Code is entered,
the unit will restart from the initial startup
screen.
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion MAX973HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion MAX973HD in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info